摘要
重力式油水分离器具有结构简单、处理量大等特点,在石油石化领域应用广泛,斜板填料作为油水分离器的常见内构件亟需进一步优化以提高油水分离器的分离效率。本文通过Fluent软件对斜板填料进行数值模拟研究,对其结构参数进行优化。通过研究发现,斜板倾斜角度为15°,斜板长度为150mm,板间距为30mm时,斜板填料可使油水分离器达到较好的分离效果。
Gravity-type oil-water separator has the characteristics of simple structure,large capacity,etc. which is widely used in the field of petroleum and petrochemical. As a common internal component,it is urgent to further optimize the inclined plate filler to improve the separation efficiency of oil-water separator. In this paper,the software Fluent was used to conduct numerical simulation research on the inclined plate filler and optimize its structural parameters. Through the research,it was found that when the Angle of the inclined plate is 15 °,the inclined plate length is 150 mm,or the plate spacing is 30 mm,the inclined plate filler can make the oil-water separator to achieve good separation effect.
作者
李朋浩
刘博文
李奎琛
田渊
申利波
Li Penghao;Liu Bowen;Li Kuichen;Tian yuan;Shen Libo(School of Chemical Engineering,Shengli College of China University of Petroleum,Dongying 257061,China)
出处
《山东化工》
CAS
2019年第8期148-149,共2页
Shandong Chemical Industry
基金
中国石油大学胜利学院大学生创新创业训练计划项目(2018015)
关键词
斜板
油水分离器
数值模拟
inclined plate
oil-water separator
numerical simulation
