期刊文献+

光束整形对激光诱导击穿光谱稳定性的改善 被引量:7

Improvement of Beam Shape Modification on Stability of Laser Induced Breakdown Spectroscopy
原文传递
导出
摘要 使用衍射光学元件将高斯激光光束整形为能量分布均匀的平顶激光光束,对比了两种激光诱导铜等离子体的特性,研究了光束整形对激光诱导击穿光谱稳定性的改善作用。研究结果表明:激光光束能量分布的均匀性引起了烧蚀坑形貌以及单次烧蚀量的差异,高斯激光和平顶激光诱导光谱的强度、等离子体温度和电子密度的相对标准偏差分别为12.33%和6.37%、2.10%和1.32%、5.31%和0.65%;光束整形后激光诱导击穿光谱的稳定性得到了明显改善,两种激光诱导产生的等离子体均呈局部热力学平衡状态。 The Gaussian laser beam is shaped into a flattop laser beam with uniform energy distribution by a diffractive optical element.The Cu plasma characteristics induced by two lasers are compared,and the improvement of the beam shape modification on the stability of laser-induced breakdown spectrum is studied.The research results show that the uniformity of beam energy distribution causes the difference in the morphology of the ablation crater and single-shot ablation amount.The relative standard deviations of the Gaussian laser and the flattop laser induced spectra intensity,plasma temperature and electron density are 12.33%and 6.37%,2.10%and 1.32%,5.31%and 0.65%,respectively.The stability of the laser-induced breakdown spectrum after beam shaping is significantly improved,and the two laser-induced plasmas are all in the local thermodynamic equilibrium state.
作者 贾军伟 付洪波 王华东 周琪琪 倪志波 董凤忠 Jia Junwei;Fu Hongbo;Wang Huadong;ZhouQiqi;Ni Zhibo;Dong Fengzhong(Anhui Provincial Key Laboratory of Photonic Devices and Materials,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei,Anhui 230031,China;University of Science and Technology of China,Hefei,Anhui 230026,China)
出处 《中国激光》 EI CAS CSCD 北大核心 2019年第3期284-289,共6页 Chinese Journal of Lasers
基金 国家自然科学基金(61505223 41775128) 中国科学院知识创新工程重大项目(Y03RC21124) 中国科学院对外重点合作项目(GJHZ1726)
关键词 光谱学 光束整形 激光诱导击穿光谱 高斯激光 平顶激光 光学衍射元件 spectroscopy beam shape modification laser-induced breakdown spectroscopy Gaussian laser flattop laser diffractive optical elements
  • 相关文献

参考文献4

二级参考文献47

  • 1王多书,罗崇泰,陈焘,刘宏开,马勉军,黄良甫.极坐标激光直写技术制作微结构[J].激光与红外,2006,36(7):525-528. 被引量:1
  • 2郭水霞,王一夫,陈安.基于支持向量机回归模型的海量数据预测[J].计算机工程与应用,2007,43(5):12-14. 被引量:9
  • 3Josip Vukusic, Jrgen Bengtsson, Marco Ghisoni et al.. Fabrication and characterization of diffractive optical elements in InP for monolithic integration with surface-emitting components [J]. Appl. Opt., 2000, 39(3): 398-401. 被引量:1
  • 4Yutaka Kuroiwa, Nobuhito Takeshima, Yoshihiro Narita et al.. Arbitrary micropatterning method in femtosecond laser microprocessing using diffractive optical elements [J]. Opt. Express, 2004, 12(9) : 1908-1915. 被引量:1
  • 5Mikael Karlsson, F. Nikolajeff. Fabrication and evaluation of a diamond diffractive fan-out element for high power lasers[J]. Opt. Express, 2003, 11(3): 191--198. 被引量:1
  • 6X. G. Deng, Y. P. Li, D. Y. Fanet al.. Pure-phase plates for super Gaussian focal-plane irradiance profile generations of extremely high order[J]. Opt. Lett., 1996, 21(24) : 1963-1965. 被引量:1
  • 7C. Sun, C. Liu. Ultrasmall focusing spot with a long depth of focus based on polarization and phase modulation[J]. Opt. Lett. , 2003, 28(2): 99-101. 被引量:1
  • 8Fu Yongqi, Ngoi Kok Ann Bryan, Ong Shing. Diffractive optical elements with continuous relief fabricated by focused ion beam for monomode fiber coupling [ J ]. Opt. Express, 2000, 7 ( 3 ) : 141-148. 被引量:1
  • 9J. R. Fienup. Iterative method applied to image reconstruction and to computer generated holograms[J-. Opt. Eng., 1980, 19(3) : 297--305. 被引量:1
  • 10刘强,张晓波,邬融,田杨超,李永平.离子束刻蚀工艺误差对DOE器件的影响[J].光电工程,2007,34(11):50-54. 被引量:4

共引文献42

同被引文献59

引证文献7

二级引证文献49

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部