期刊文献+

屏蔽电机屏蔽套电磁力仿真分析 被引量:5

Simulation and analysis of electromagnetic force on shield of canned motor
下载PDF
导出
摘要 屏蔽电机泵中屏蔽套为关键部件之一,起物理隔离作用,其完整性对一回路的安全运行有着重要的影响。屏蔽套安装在主泵电机内,受到交变磁场、冷却剂流场等因素的综合作用,载荷条件复杂。通过屏蔽电机内电磁场的谐波分析,得到磁感应强度分布规律和作用于屏蔽套的电磁力分布规律。结果显示,在铁芯范围内沿电机圆周方向屏蔽套所受电磁力呈周期分布,以切向力为主,且定子屏蔽套所受电磁力大于转子屏蔽套;从铁芯指向绕组端部,屏蔽套所受电磁力逐渐减小,离开铁心端面对应的轴向位置后,减小速率最大。 As one of the key parts inside canned motor,the shield functions as isolation physically,which integrity may affect operation safety of primary loop in plant.The shield is installed inside RCP,who is influenced by complex loads,such as alternating magnetic field and coolant flow field.Based on the harmonic analysis in electromagnetic field of the motor,the distribution of magnetic induction and electromagnetic force on the shield are obtained,which results show that,the electromagnetic force borne upon the shield within the iron core is distributed periodically in circumferential direction of the motor with the tangential force as main force.Meanwhile the electromagnetic force borne on the shield is larger than that on rotor shield,who shall decrease little by little starting from iron core along winding end.However,the decreasing rate shall be the maximum as departing from the axial position corresponding to iron core end.
出处 《机械设计与制造》 北大核心 2012年第4期26-28,共3页 Machinery Design & Manufacture
基金 国家"973"计划项目(2009CB724302)
关键词 屏蔽电机 屏蔽套 电磁力 端部磁场 Canned motor Can Electromagnetic force Electromagnetic field at ends
  • 相关文献

参考文献6

  • 1M.Enokizono, M.Morikawa, K.Kawamura.Distribution of Two-dimensional Magnetic Properties in Three-phase Induction Motor Model Core [J]. IEEE TRANSACTIONS ON MAGNETICS, 1996,32(5 ): 3937-3939. 被引量:1
  • 2Ajay Kumar,Sanjay Marwaha,Anupama Marwaha,N.S. Kalsi.Magnetic Field Analysis of Induction Motor for Optimal Cooling Duct Design [J]. Simulation Modelling Practice and Theory, 2010( 18 ) : 157-164. 被引量:1
  • 3H.Kometani, S.Sakabe, KNakanishi.3-D Electro-magnetic Analyses of a Cage Induction Motor with Rotor Skew [J].IEEE Transactions on Energy Conversion, 1996,11 (2) : 331-337. 被引量:1
  • 4孔繁余,周水清,孔祥花,沈小凯.基于数值模拟的屏蔽泵屏蔽套损耗研究[J].水泵技术,2010(2):23-27. 被引量:3
  • 5吴雅娟,张玉斌,王金娥.屏蔽泵石墨推力轴承强度的可靠性计算[J].水泵技术,1995(3):23-26. 被引量:1
  • 6汤蕴瑶.电机内的电磁场[M].第2版.北京:科学出版社,1998. 被引量:1

二级参考文献11

  • 1马德鑫.再论屏蔽式异步电动机的设计特点[J].电机技术,2004(3):17-20. 被引量:11
  • 2孔祥花,孔繁余,季建刚,吕毅,黄建军.屏蔽泵能耗的计算与试验[J].排灌机械,2006,24(4):10-13. 被引量:16
  • 3孔祥花,孔繁余,季建刚,吕毅,黄建军.屏蔽泵冷却润滑回路分析计算[J].水泵技术,2006(5):8-10. 被引量:14
  • 4孔繁余 袁寿其 施卫东 等.屏蔽泵循环回路的设计试验研究.2002中国流体机械技术流体机械专刊,2002,(10):353-356. 被引量:4
  • 5Hanson, Lloyd. Development of a magnetic bearing API process pump with a canned motor. International Pump Users Symposium, 1992:3-8. 被引量:1
  • 6Inside the canned motor centrifugal pump. WORLD PUMPS, September 1999. 被引量:1
  • 7Kong Fanyu, Chen Shiliang, Yuan Shouqi. Expermental Research on Design of Circulating Loop of Canned Motor Pump [C]. The 7th Asian International conference on Fluid Machinery, Japan: 2003:2-8. 被引量:1
  • 8Calum Scott. Considerations for a canned motor pump [J]. World Pumps, 2004, (459) : 22-25. 被引量:1
  • 9A.C.Smith, E. Peralta-Sanchez, Simon Purbrook. Line-Start Permanet Magnet Motor for Pump Applications. The 3rd IET International Conference on Power Electronics, Machines and Drives (PEMD 2006): ( 4-6 April 2006, The Clontarf Castle, Dublin, Ireland ). 被引量:1
  • 10[美]豪根(Haugen,E·B) 著,汪一麟等.机械概率设计[M]机械工业出版社,1985. 被引量:1

共引文献2

同被引文献48

引证文献5

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部