摘要
采用双螺杆反应挤出的方式制备了钢带管粘接树脂，研究了助剂搭配、原材料选择、工艺参数等几个主要因素对反应挤出制备粘接树脂的影响。结果表明：共单体和复配引发体系的使用比传统方式更能提高PE的接枝率和接枝效率，得到的粘接树脂具有更优异的粘接强度。
In this paper, the adhesion resin of steel-PE composite pipe was prepared by twin-screw ex- truder; the effect of assistant＇s collocation/material choosing/technological parameter to the preparation of ad- hesion resin was studied. Results showed that multi-monomer and complex initiator can increase the grafting ration significantly, and the adhesion resin prepared by this way had the excellent bonding strength.
出处
《塑料工业》
CAS
CSCD
北大核心
2009年第A01期147-150,共4页
China Plastics Industry
关键词
反应挤出
接枝反应
接枝率
粘接树脂
Reaction Extrusion
Grafting Reaction
Grafting Ratio
Adhesion Resin
