摘要
真空压铸能有效减少铸件内的气孔缺陷,提高铸件的致密度。将型腔内的气体快速排出是真空压铸技术的关键,也直接影响真空压铸件的质量。通过分析气体在真空排气管路中的流动物理过程,研究影响型腔真空度的主要工艺因素,提出使型腔快速达到高真空度的最优化工艺参数方案。结果表明,大截面、短距离的排气通道、大抽气速度,小抽气容积有利于型腔快速达到高真空度。
Density of the die castings was improved as a result of effectively reducing gas hole in the castings through vacuum die casting.It was a key point for rapid exhaust in cavity in vacuum die casting,which directly affected the quality of die castings.Through analyzing flow process of gas in vacuum exhausting pipe,main factors influencing vacuum rate in cavity were investigated,and optimized processing parameters were presented to rapidly realize high vacuum rate in cavity.The results show that it is beneficial for rapid realization of high vacuum rate in cavity by setting exhausting pipe with large section and short distance and high exhausting speed as well as small cavity volume.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2011年第1期54-55,105,共2页
Special Casting & Nonferrous Alloys
基金
国家重点基础研究发展计划(973计划)资助项目(2007CB613702)
重庆市科技攻关计划项目(CSTC
2009AB4010)
关键词
真空压铸
气体流动
排气道截面积
真空度
Vacuum Die Casting,Gas Flow,Cross-sectional Area,Vacuum Rate
