期刊文献+

Thermodynamic Analysis of Desulfurization and Its Connection With Deoxidation and Temperature for SPHC in JISC During LF Refining Process 被引量:3

Thermodynamic Analysis of Desulfurization and Its Connection With Deoxidation and Temperature for SPHC in JISC During LF Refining Process
原文传递
导出
摘要 The thermodynamic characteristics of desulfurization reaction (CaO)+[S]=(CaS)+[O] is analyzed based on the detailed composition of liquid steel and slag of Steel Plate Hot Commercial (SPHC) in Jiuquan Iron & Steel Corporation(JISC), where the activities of CaO, CaS and Al2O3 in molten slag are calculated by thermodynamic software FactSage for a more accurate result. The critical values of [O%]/[S%] for desulfurization at different temperature is are obtained, typically 0.09 at 1873K, which shows directly that it should deoxidize adequately for obtaining a favorable desulfurization condition. In addition, the thermodynamic analysis indicates that the actual dissolved O is much higher than that of equilibrium calculation which shows Al-O reaction in LF is far away from equilibrium, but it is perfect agreement with the computing results when taking the activity of Al2O3 as 1 that due to the inclusion component in LF is mainly Al2O3. Besides, with the temperature rise, the sulfur partition ratio increases softly meanwhile the reaction between Al and O is limited to a great degree resulting in the increase a dissolved oxygen in liquid steel that decreases the sulfur partition ratio seriously. As a result, the sulfur partition ratio appears to decrease with temperature increase in Al killed steel. The thermodynamic characteristics of desulfurization reaction (CaO)+[S]=(CaS)+[O] is analyzed based on the detailed composition of liquid steel and slag of Steel Plate Hot Commercial (SPHC) in Jiuquan Iron & Steel Corporation(JISC), where the activities of CaO, CaS and Al2O3 in molten slag are calculated by thermodynamic software FactSage for a more accurate result. The critical values of [O%]/[S%] for desulfurization at different temperature is are obtained, typically 0.09 at 1873K, which shows directly that it should deoxidize adequately for obtaining a favorable desulfurization condition. In addition, the thermodynamic analysis indicates that the actual dissolved O is much higher than that of equilibrium calculation which shows Al-O reaction in LF is far away from equilibrium, but it is perfect agreement with the computing results when taking the activity of Al2O3 as 1 that due to the inclusion component in LF is mainly Al2O3. Besides, with the temperature rise, the sulfur partition ratio increases softly meanwhile the reaction between Al and O is limited to a great degree resulting in the increase a dissolved oxygen in liquid steel that decreases the sulfur partition ratio seriously. As a result, the sulfur partition ratio appears to decrease with temperature increase in Al killed steel.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2011年第S2期135-140,共6页
关键词 LF refining DESULFURIZATION DEOXIDATION sulfur partition ratio LF refining desulfurization deoxidation sulfur partition ratio
  • 相关文献

参考文献7

  • 1郝宁,王海涛,王新华,李宏,王万军.硫容量和硫分配比的计算及分析[J].北京科技大学学报,2006,28(1):25-28. 被引量:18
  • 2Andersson M A T,Jonsson P G,Nzotta M M.Application of the sulphide capacities concept on high basicity ladle slag in bearing steel product[].Iron and Steel Institute of Japan.1999 被引量:1
  • 3Hiroki OHTA,Hideaki SUITO.Activities in CaO-MgO-Al2O3slags and equilibria of Al,Mg and Ca.[].Iron and Steel Institute of Japan.1996 被引量:1
  • 4Suito H,Inoue R.Thermodynamics on control of inclusions composition in ultra clean steels[].ISIJ International.1996 被引量:1
  • 5WANG Yin.Investigation behaviour and control technique of non-metallic inclusion in alloy steel during secondary refining[]..2008 被引量:1
  • 6Nzotta M M,Sichen D,Seetharaman S.Sulphide capacities in some multi component slag systems[].Iron and Steel Institute of Japan.1998 被引量:1
  • 7Elliot J F,Gleiser M and Ramakrishna.Thermochemistry for Steelmaking,Addison-Wesley Publishing Co,Reading,Mass[]..1963 被引量:1

二级参考文献6

  • 1Nzotta M M, Sichen D, Seetharaman S. Sulphide capacities in some multi component slag systems. ISIJ Int, 1998, 38:1170. 被引量:1
  • 2Young R W, Duffy J A, Hassall G J, et al. Use of optical basicity concept for determining phosphorus and sulphur slagmetal partitions. Ironmaking Steelmaking, 1992. 19:201. 被引量:1
  • 3Andersson M A T, Jonsson P G, Nzotta M M. Application of the sulphide capacity concept on high-basicity ladle slags used in bearing-steel production. ISIJ Int. 1999, 39:1140. 被引量:1
  • 4Ohta H, Sutto H. Activities of SiO2 and Al2O3 and activity coefficients of FetO and MnO in CaO SiO2-Al2O3-MgO slags.Metall Tram B, 1998, 28B: 119. 被引量:1
  • 5Nzotta M M, Sichen D, Seetharaman S, A study of the sulfide capacities of iron-oxide containing slags, Metall Tram B,1999, 30B: 909. 被引量:1
  • 6G6rnerup M. Studuies of Slag Netallurgy in Stainless Steelmaking [Dissertation]. Stockholm: Department of Metallurgy, Royal Institute of Technology, 1997. 被引量:1

共引文献17

同被引文献9

引证文献3

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部