摘要
为了探究轴向气体流动特征对旋流管状火焰传热性能的影响,在实验中引入轴向喷出的N;作为稀释剂。研究了不同的轴向流量、喷嘴孔径及喷孔数量下的火焰结构及传热规律,重点分析了不同流动条件下管状燃烧室内火焰径向传热的温度分布特征。分析结果表明:旋流管状火焰能将一定量的气体工质快速升温至1 000℃以上;随着轴向稀释气体流量的增加,火焰根部被吹离切向入口,火焰锋面向燃烧室下游移动,导致火焰根部温度显著降低,而且最高温度区域也向下游移动,最高温度值也有所降低;随着喷嘴孔径的增大,火焰锋面位置无明显变化,而火焰根部向喷嘴侧移动,且相同轴向位置的径向温度更高,即喷嘴孔径的增加有助于对轴向气流的快速加热;在当前实验条件下由于受到空间限制,喷孔数量的变化对火焰位置与温度分布无明显影响。
In order to explore the effect of axial air flow characteristics on the heat transfer performance of swirling tubular flame, the axial jet N;was introduced as the diluter in the test.The flame structure and heat transfer law under different axial flow rates, nozzle diameters and nozzle number were experimentally studied.The temperature distribution characteristics of flame radial heat transfer in the tubular combustion chamber under different flow conditions were emphatically analyzed.The analysis results show that the swirling tubular flame can rapidly raise the temperature of a certain amount of gas medium to more than 1 000 ℃;with the increase of axial dilution gas flow rate, the flame root is blown away from the tangential inlet, and the flame front moves downstream of the combustion chamber, resulting in a significant decrease in the temperature of the flame root, the highest temperature region moves downstream, and its value also decreases.With the increase of nozzle aperture diameter, the position of flame front has no obvious change, while the flame root moves to the nozzle, and the radial temperature at the same axial position is higher, that is, the increase of nozzle aperture diameter is helpful to the rapid heating of axial airflow.Under the current experimental conditions, due to the limitation of space, the change of nozzle number has no significant effect on the flame position and temperature distribution.
作者
赵晓尧
彭维康
余筱
ZHAO Xiao-yao;PENG Wei-kang;YU Xiao(Institute of Civil-Military Integration Innovation,North University of China,Taiyuan,China,030051;AECC Sichuan Gas Turbine Establishment,Chengdu,China,610500;School of Aerospace Engineering,Beijing Institute of Technology,Beijing,China,100081)
出处
《热能动力工程》
CAS
CSCD
北大核心
2022年第5期46-52,共7页
Journal of Engineering for Thermal Energy and Power
基金
山西省基础研究计划资助项目(20210302124223)。
关键词
旋流管状火焰
轴向射流
火焰结构
传热规律
温度特征
swirling tubular flame
axial jet
flame structure
heat transfer law
temperature characteristics
