期刊文献+

含铜含铁蚀刻废液的电解提铜再生研究

Study on the Regeneration of Electrolytic Copper Extraction from Etching Waste Liquid Containing Copper and Iron
下载PDF
导出
摘要 本文通过条件试验研究了含铜三氯化铁蚀刻废液电解的反应规律和霍尔槽电流密度,得出了常温常压下电解含铜含铁蚀刻废液时阴极液的离子浓度范围和电流密度范围。试验结果表明,Cu^(2+)浓度介于2%~4%,Fe^(2+)浓度介于6%~8%,Fe^(3+)浓度小于1%,电流密度范围为1.5~3.5 ASD。此时,阴极析出铜效果最佳,阳极出料的氧化还原电位(ORP)为520~560 mV,实现电解液再生的目的。 Through the condition test,the reaction law of copper-containing ferric chloride etching waste liquid electrolysis and the current density of Hall cell are studied,and the ion concentration range and current density range of catholyte during electrolysis of etching waste liquid containing copper and iron under normal temperature and pressure are obtained in this paper.The test results show that the Cu^(2+)concentration is 2%~4%,the Fe^(2+)concentration is 6%~8%,the Fe^(3+)concentration is less than 1%,and the current density range is 1.5~3.5 ASD.At this time,the effect of copper precipitation at the cathode is the best,and the oxidation-reduction potential(ORP)of the anode discharge is 520~560 mV,realizing the purpose of electrolyte regeneration.
作者 邓炳林 肖晋宜 罗恒 陈建辉 李祁明 DENG Binglin;XIAO Jinyi;LUO Heng;CHEN Jianhui;LI Qiming(R Environmental Technology Co.,Ltd.,Huizhou 516200,China)
出处 《中国资源综合利用》 2022年第5期13-15,20,共4页 China Resources Comprehensive Utilization
关键词 三氯化铁蚀刻液 铜蚀刻 电解铜 蚀刻废液 ferric chloride etching solution copper etching electrolytic copper etching waste solution
  • 相关文献

参考文献1

二级参考文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部