摘要
The effect of microstructure and passive film on the corrosion resistance of 2507 super duplex stainless steel(SDSS)in simulated marine environment was investigated by electrochemical measurements,periodic wet–dry cyclic corrosion test,scanning Kelvin probe force microscopy,atomic force microscopy,and X-ray photoelectron spectrometry.The results show that the occupation ratio ofγphase increases with the decrease in cooling rate,whereas the content ofαphase reduces gradually.In addition,theσprecipitated phase only emerges in the annealed steel.The pitting sensitivity and corrosion rate of 2507 SDSS reduce first and then increase as the cooling rate decreases.Theσprecipitated phase drastically reduces the protective ability of the passive film and facilitates micro-galvanic corrosion of the annealed steel.For various microstructures,the pits are preferentially distributed within theσandγphases.The corrosion resistance of 2507 SDSS prepared by different cooling methods is closely related to the microstructure and structure(stability and homogeneity)of the passive film.Normalized steel shows an optimal corrosion resistance,followed by the quenched and annealed steels.
基金
financially supported by the National Natural Science Foundation of China(No.51871026)
the Natural Science Foundation of Zhejiang Province,China(No.LY18E010004)
supported by the National Material Environmental Corrosion Infrastructure,China。
