摘要
为了提高LED照明系统均匀度检测方法的测量精度和速度,提出了一种基于线阵电荷耦合器件(CCD)步进扫描的均匀度检测新方法。采用线阵CCD及步进扫描机构、控制系统、图像采集系统、积分球光源系统、非均匀性修正单元和计算机系统等构建了均匀度检测装置。对检测用的线阵CCD的非均匀性响应进行了检测与修正,测试了光学暗室噪声与待测LED均匀照明系统的CCD图像灰度矩阵。分析表明,这种方法测得暗室噪声的均方差约为0.0038,测得待测照明系统最佳参数设置时的均匀度为92.3%。
In order to improve the measurement accuracy and speed of the uniformity detection of LED lighting system, a new illuminative uniformity measure method based on the step-scanning of linear array CCD is proposed in this paper. The uniformity measure equipment is founded by using linear array CCD, stepping scanning mechanism, control system, image acquisition system, integrating sphere light source system, non-uniformity correction unit and computer system. The non-uniformity of the linear array CCD response is detected and corrected, and the CCD image gray matrix of the extinctive chamber noise and the test LED uni- form luminance system are tested. The results show that the mean square error of the extinctive chamber noise in this paper is about 0.0038, and the best luminous uniformity of the test LED uniform luminance systems is 92.3%.
出处
《光通信技术》
北大核心
2018年第3期47-51,共5页
Optical Communication Technology
基金
国家自然科学基金项目(60940035)资助
陕西省科技重点项目(No.2013SZS14-P01)资助
陕西省教育厅重点实验室科研计划(No.13JS038)资助
西安工业大学校长科研基金(No.2014-000176)资助
关键词
器件与测量
线阵CCD
LED照明系统
非均匀性修正单元
光照均匀度
device and measurement
linear array CCD
LED luminance system
non-uniformity correctionunit
illuminative uniformity
