摘要
为解决YB618型包装机堆叠塔提升美容装置因设备故障时无法及时排空,导致烟条外观质量下降、原辅材料浪费等问题,通过改变烟条相互堆叠的提升方式,设计了"一条一推"提升美容装置。该装置以独立的伺服电机为动力源,以同步带传动链、齿轮齿条机构作为动力传输纽带,在滑动导轨、固定导轨的相互配合下实现烟条等间隔提升,同时增加第六面美容装置对烟条进行全方位美容。结果表明,改进后烟条提升模块停机故障减少3次/月,报废烟条数量减少68条/月,包装质量不合格烟条数量减少67条/月,烟条外观质量缺陷比例降低16百分点。该装置有效提高了包装设备有效作业率,改善了烟条外观质量。
YB618 carton overwrapper fails to empty timely at the time of machine failure, the cartons stacked in its carton elevating and film shaping device, which results in cartons with unsatisfied appearance and material waste. Instead of the stacking and elevating means, a ＂one carton one push＂ carton elevating device was designed. The new device took an independent servo motor as power source, timing belt and rack-and-pinion mechanism for power transmission. Cigarette cartons were elevated at regular interval under the cooperation of sliding guide and fixed guide. Meanwhile, a sixth side shaper was added. The results of application showed that the frequency of machine shutdown caused by carton elevating device decreased by 3 times/month, the amount of damaged cartons, the amount of defective cartons, and the proportion of cartons with appearance defects reduced by 68 carton/month, 67 carton/month, and 16 percentage points, respectively. The new device effectively promotes the efficiency of packing machines and improves the appearance quality of cigarette cartons.
出处
《烟草科技》
EI
CAS
CSCD
北大核心
2017年第1期92-97,共6页
Tobacco Science & Technology
关键词
YB618型包装机
烟条提升
美容装置
堆叠塔
外观质量
YB618 carton overwrapper
Carton elevating
Shaping device
Stacking tower
Appearance quality
