摘要
采用Y-II透平油专用滤油机处理含水油液,脱除水分使其恢复使用性能.对影响真空滤油机脱水效率因素:温度、真空度、处理时间、通气量、通气位置进行对比实验;分析了各种处理条件下脱水率变化趋势及原因;得出温度在60℃,下部通气量为19 L/min,真空度维持在0.090 Mpa状态下脱水率最高。
The oil fluid containing water is treated by specific Y-II turbine oil filter to remove its water in order to restore its performance. The contrast experiments are conducted on the factors affecting the dewatering efficiency of a vacuum filter such as temperature, vacuum degree, treatment time, ventilation amount, and ventilation position, and the optimal dewatering efficiency is obtained under the condition of 60 ℃, 19L/min lower portion aeration and 0.090Mpa vacuum degree after the analysis of the changing trends and reasons of dewatering efficiency under each treatment condition.
出处
《重庆工商大学学报（自然科学版）》
2014年第11期74-78,共5页
Journal of Chongqing Technology and Business University:Natural Science Edition
基金
重庆市科技攻关重点项目(CSTC2009AB3234)
重庆高校科技资助项目(KJTD201019
KJZH11211)
关键词
废油净化
脱水率
实验研究
waste oil purification
dewatering efficiency
experiment research
