期刊文献+

7050铝合金热压缩动态再结晶研究 被引量:3

Dynamic recrystallization of 7050 aluminium alloy by hot compression
下载PDF
导出
摘要 用Gleeble-1500D热模拟压缩试验对7050铝合金高温流变和动态再结晶行为进行研究。结果表明:综合考虑温度和应变速率对动态再结晶的影响,得到动态再结晶峰值应变方程εp=0.015427×ε0.06081·exp(15319/RT),峰值应变与临界应变的关系εc=0.72εp,从而为有限元数值模拟和热加工工艺提供理论和数据参考。 The hot deformation behavior and dynamic recrystallization of 7050 aluminum alloy were investigated on Glee- ble-1500D thermal/mechanical simulator. The results show that the peak strain equation of dynamic recrystallization is εp=0.015 427×ε 0.060 81 exp(15 319/RT). exp(15 319/RT)with the consideration of temperature and stress rate, and the relation between peak strain and critical strain is εc=0.72εp , which provides the theoretical and data reference for finite element analysis and thermal processing.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 2014年第3期52-54,共3页 Ordnance Material Science and Engineering
基金 国家自然科学基金面上项目(51275543) 国家科技部重大专项项目(2012ZX04010-081) 重庆大学大型仪器设备开放基金(2012121516)
关键词 铝合金 热压缩 动态再结晶 临界应变 aluminum alloy hot compression dynamic recrystallization critical strain
  • 相关文献

参考文献7

  • 1Gottstein G,Frommert M,Goerdeler M,et al.Prediction of the critical conditions for dynamic recrystallization in the austenit-ic steel 800H [J].Materials Science and Engineering A,2004(387/388/389):604-608. 被引量:1
  • 2Estrin Y,Toth L S,Molinari A,et al.A dislocation-based mod-el for all hardening stages in large strain deformation [J].Acta Materialia,1998,46(15):5509-5522. 被引量:1
  • 3Pantleon W.Stage IV work-hardening related to disorientations in dislocation structures [J].Materials Science and Engineer-ing A,2004,387/388/389:257-261. 被引量:1
  • 4Poliak E I,Jonas J J.Initiation of dynamic recrystallization in constant strain rate hot deformation [J].ISIJ international,2003,43(5):684-691. 被引量:1
  • 5Shi H,Mclaren A J,Sellars C M,et al.Constitutive equations for high temperature flow stress of aluminum alloys [J].Mater Sci Technol,1997,13(3):210-216. 被引量:1
  • 6肖凯,陈拂晓.铸态铅黄铜动态再结晶模型的建立[J].塑性工程学报,2008,15(3):132-137. 被引量:10
  • 7郭强,严红革,陈振华,张辉.Mg-Al-Zn系合金高温压缩流变应力研究[J].湖南大学学报(自然科学版),2006,33(3):75-79. 被引量:6

二级参考文献18

  • 1姚祖斌,吴洛平,姚天长,张锦云.供应态HPb59-1黄铜超塑性压缩的试验研究[J].热加工工艺,1993,22(1):5-9. 被引量:6
  • 2MCQUEEN H J.Metal forming:Industrial mechanical computational and microstructura[J].Journal of Matericds Processing Technology,1993,37(1-4):3-36. 被引量:1
  • 3WAHLEN A,FEURER U,REISSNER J.Computer controlled measurement and aralytical modeling of flow stresses cluring hot deformation of the copper alloy CuZn42Mn2[J].Journal of Materials Processing Technology,1997,63 (1-3):233-237. 被引量:1
  • 4TAKUDA H,FUJIMOTO H,HATTA N.Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures[J].Journal of Materials Processing Technology,1998,80-81:513-516. 被引量:1
  • 5BARNETT M R.Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ31[J].Journal of Light Metals,2001,1(3):167-177. 被引量:1
  • 6GALIYEV A,KAIBYSHEV R,GOTTSTEIN G.Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60[J].Acta Materialia,2001,49(7):1199-1207. 被引量:1
  • 7BARNETT M R.Recrystallization during and following hot working of magnesium alloy AZ31[J].Materials Science Forum,2003,419-422(1):503-508. 被引量:1
  • 8MAGD E El,ABOURIDOUANE M.Compression test on magnesium alloy MgAl8Zn at high strain rates and temperatures[A].KAINER K U.International Congrees "Magnesium Alloys and Their Applications"[C].Germany:WILEY-VCH Verlag GambH & Co,2000,325-329. 被引量:1
  • 9GALIYEV A,SITDIKOV O,KAIBYSHEV R.Deformation behavior and controlling mechanisms for plastic flow of magnesium and magnesium alloy[J].Materials Transactions,2003,44(4):426-435. 被引量:1
  • 10林法禹.黄铜的超塑性研究.锻压机械,1980,(3):4-8. 被引量:3

共引文献14

同被引文献38

引证文献3

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部