期刊文献+

大型板坯电渣重熔过程的脱氧热力学模型 被引量:2

Thermodynamics Model of Deoxidation in ESR Process for Large Slab Ingots
下载PDF
导出
摘要 以12Cr2Mo1R钢所用渣系为研究对象,选择Al作为脱氧剂,建立脱氧热力学模型.在不同的Al添加量条件下对12Cr2Mo1R钢熔渣-金属界面处各物质的平衡质量分数进行计算,分析各物质平衡质量分数随Al添加量的变化规律,为在给定Al添加量条件下进行终点成分预报,以及根据钢种成分要求选择Al添加量范围提供理论依据.结果表明,随Al添加量的增加,Si,Mn,Al,Al2O3的平衡质量分数呈上升趋势;SiO2,MnO,FeO的平衡质量分数呈下降趋势.若仅从Si,Mn,Al成分合格的角度考虑,Al的添加量占吨钢的百分比不能超过0.2%. A thermodynamics model for deoxidation in the slag system of 12Cr2Mo1R steel with Al as a deoxidizer was developed.The equilibrium mass fraction of 12Cr2Mo1R steel with different Al additions was calculated at the interface of slag-metal substance.The dependence of the equilibrium mass fraction on the Al additions was investigated,which provided a theoretical basis to the end composition prediction with the given amount of Al and to the limits on the amount of Al according to the composition required by certain steels.The results show that,the mass fractions of Si,Mn,Al and Al2O3 increase with the increasing Al content,while the mass fractions of SiO2,MnO and FeO tend to decrease.Considering the limitation of Si,Mn and Al mass fraction,the amount of Al added in one ton steel should not exceed 0.2%.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2013年第8期1132-1135,共4页 Journal of Northeastern University(Natural Science)
基金 国家自然科学基金青年基金资助项目(51104038) 中央高校基本科研业务费国家项目培育种子基金资助项目(N120402008)
关键词 大型板坯 电渣重熔 脱氧 热力学模型 12CR2MO1R large slab ingot ESR(electroslag remelting) deoxidation thermodynamics model 12Cr2Mo1R
  • 相关文献

参考文献12

  • 1Medina S F, Ruiz-Valdepenas F, Chapa M, et al. Thermodynamic study of exchange reactions in the manufacturing of microaUoyed steels by the ESR process [ J ]. Steel Research, 1998,69 ( 8 ) : 312 - 317. 被引量:1
  • 2褚海明.控制大型电渣炉炉渣成分的探讨[J].大型铸锻件,1985(1):5-17. 被引量:2
  • 3米切尔A,卡蒙纳FR,魏季和.电渣过程中的脱氧[J].西安建筑科技大学学报:自然科学版,1982(4):53-61. 被引量:1
  • 4刘胜国,徐明德,刘凤霞,王昌生,李德胜.高碳铬轴承钢电渣重熔过程中的氧及其控制[J].特殊钢,1993,14(3):45-48. 被引量:6
  • 5姜周华.电渣冶金的物理化学及传输现象[M].沈阳:东北大学出版社,2003:151. 被引量:2
  • 6向大林,朱孝渭,王克武.电渣重熔过程中脱氧对低铝控制的影响[J].钢铁研究学报,1989,1(4):9-14. 被引量:8
  • 7Medina S F, Lopez F, Coedo A G. Manufacture by electroslag remelting of microalloyed steels with two precipitating metal elements [ J ]. lronmaking and Steelmaking, 1997,24 (4) :329 - 336. 被引量:1
  • 8Rao A S,Prasad W S,Baligidad R G,et al. Influence of hot working on electroslag remelted low alloy steel [J ]. Transactions of the Indian Institute of Metals, 1999, 52 (2/3) :139 - 146. 被引量:1
  • 9Chatterjee M, Balasubramanian M S N, Gupt K M, et al. Inoculation during electroslag remelting of 15CDV6 steel [J]. Ironmaking and Steelmaking, 1990,17 ( 1 ) :38 - 42. 被引量:1
  • 10Shi C B,Chen X C, Guo H J, et al. Assessment of oxygen control and its effect on inclusion characteristics during electroslag remelting of die steel [J]. Steel Research International,2012.85 (5) :472 -486. 被引量:1

二级参考文献27

  • 1上重厂.《电渣重熔728工程大搬件鉴定会议文集》,1982 被引量:1
  • 2Wei Chiho.A.Mitchell,The Appllcation of the Chemical Reactions and Mass Transfer Model to the ESR Process on an Industrial Uait, 1982 被引量:1
  • 3科技文献出版社.《电渣炉出国参观考事报告》1979 被引量:1
  • 4上重厂.《日本考察学习资料》,1983 被引量:1
  • 5W. E. Duckworth. G .Hoyle. 《Electro-Slag Refiming》, 1969 被引量:1
  • 6Proceedings of the 2nd International Symposium on Electroslag Remelting Rrocess,1969 被引量:1
  • 7Proceedings of the 4th International Symposium on Electroslag Remelting Process. June T-8, 1973 被引量:1
  • 8重庆特殊钢厂.《低能耗、无污染电渣重熔CT渣系的研究》,1982 被引量:1
  • 9获野知已 西胁醇.《特殊精炼部会最终报告书》[J].文献,(1):73-73. 被引量:1
  • 10United States Patent No4184869, Method for Using Flux and Slag Deoxidizer in ESR Process 1980 被引量:1

共引文献15

同被引文献15

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部