摘要
基于田湾核电站涉网事故,使用WinCC软件构建了500 kV开关站的事故应急处理流程。从事故现象、事故处理流程等方面出发,模拟了500 kV开关站的各类跳闸事故及母线故障,丰富了电站事故管理的预案形式,使新上岗的运行人员能尽快对这些事故有比较深刻的认识,认清事故发生的现象,学习事故处理的方法,有效降低了事故所造成的损失。
Based on the accident simulation project in Tianwan Nuclear Power Plant, the whole accident handling process of a 500 kV switching station was established, in which switch failures and bus faults can be simulated, This simulation system can enrich the accident library and let the new workers have a profound understanding of these accidents, which helps to reduce the loss caused by these accidents.
出处
《实验室研究与探索》
CAS
北大核心
2013年第3期71-75,共5页
Research and Exploration In Laboratory
基金
国家自然基金资助项目(S1077092)
"863"基金资助项目(2011AA05A108)
关键词
事故处理
WINCC
涉网事故
开关故障
母线故障
组态软件
accident handling
WinCC
accident affecting the grid
switch failure
bus fault, configuration software
