摘要
针对曲肘式注塑机的合模机构在锁模状态下,模板变形会影响注塑制品质量的问题,将正交试验设计方法和有限元分析软件相结合,对合模机构的整体结构进行优化设计。利用有限元软件模拟正交试验,确定了影响模板变形的关键因素和非关键因素,建立了合模机构的优化设计的数学模型。经过优化后的合模机构无论是在减小模板的变形、提高模板间的平行度精度及降低最大等效应力上,还是在材料的节省上都取得了很好的效果,并且采用这种方法还可以明显减少有限元计算的次数、提高整个结构优化过程的效率。最后根据优化结果得到了更加合理的设计方案。
The platen deformation influences the injection products quality when the clamping mechanism is in clamping state. To solve the problem, combining orthogonal design with FEA software, the whole structure of the clamping mechanism was systemati- cally optimized. Through the FEA simulation of orthogonal experiments, the key factors that affected the platen deformation were de- termined, and non-critical factors were discarded. So a simplified mathematics model for optimization was formulated and genetic algo- rithm was used to find the solution. The results show that the platen deformation can be reduced with a light-weight material design. And the simulation cycles are also minimized with the orthogonal design. Finally, a more reasonable structure design scheme was ob- tained for industrial purpose.
出处
《机床与液压》
北大核心
2012年第21期99-104,126,共7页
Machine Tool & Hydraulics
基金
国家自然科学基金项目(50705014)
广东省教育部产学研结合项目(2009A090100013)
关键词
注塑机
合模机构
有限元
正交试验设计
优化设计
Injection molding machine
Clamping mechanism
FEA
0rthogonal design
Optimization design
