摘要
目的:利用二次回归正交旋转组合设计对绵萆薢多糖(DSPS)提取工艺进行优化。方法:根据中心组合Box-Benhnken实验设计原理,采用三因素三水平的响应面分析法,依据回归分析确定各工艺条件的影响因子,以DSPS得率为响应值作响应面和等高线图。结果:DSPS的优化工艺参数为:提取次数为2次,液料比为52:1,提取时间为1.8h。在此条件下DSPS得率理论预测值为15.86%,通过验证实验,DSPS得率实测值为15.79%。结论:本文所建立的数学模型有意义(P<0.001),可用来对DSPS的提取工艺进行分析和预测。
Objective： To optimize the extraction technique of Dioscorea septemloba polysaccharides（DSPS） by quadratic regression general rotary unitized design.Methods： The method of response surface analysis with 3 factors and 3 levels was adopted according to the Box-Benhnken center-united experimental design principles based on one-factor tests.Then the factors influencing the technological parameters were determined by means of regression analysis.Response surface and contour were finally graphed with the extraction rate of DSPS（%） as the response value.Results： The optimum extraction conditions of DSPS（%） were concluded as follow： extraction times of 2,liquid-solid ratio of 52：1,extraction time of 1.8 hours.Under these conditions,the yield of DSPS is up to 15.86% and its experimental value is 15.79%.Conclusion： The mathematical model that the present study established was significant（P0.001）,and it might be applied to analysis and prediction the extraction technique of DSPS.
出处
《中华中医药杂志》
CAS
CSCD
北大核心
2012年第11期2918-2921,共4页
China Journal of Traditional Chinese Medicine and Pharmacy
基金
国家科技支撑计划(No.2007BAI20B00)
浙江省教育厅(No.Y200907376)~~
关键词
二次回归正交旋转组合
绵萆薢多糖
提取工艺
响应面分析法
Quadratic regression general rotary unitized design
Dioscorea septemloba polysaccharides
Extraction technique
Response surface methodology
