摘要
根据双摆线转子齿廓生成方式推导其齿廓方程,再由啮合原理推导与之共轭的齿廓.使用UG/Open GRIP模块,在UG环境下开发双摆线转子的自动生成程序.通过离散化齿廓的数学表达式,建立相应的曲线,并且在接口界面中控制和改变参数值,得到用户需要的转子模型.
According to the formation method of cycloid,a rotor profile equation was deduced.Based on the theory of gearing,its conjugate profile can be obtained.UG/Open GRIP was used to generate dual-cycloid rotor automatically.Corresponding curves were built by mathematical expression having discrete feature.To get the desired rotor model,the parameters can be controlled and changed in the control interface.
出处
《上海工程技术大学学报》
CAS
2012年第1期58-61,共4页
Journal of Shanghai University of Engineering Science
基金
上海市教委科研创新资助项目(10YZ174)
关键词
摆线齿轮
二次开发
参数化设计
cycloid rotor
secondary development
parametric design
