期刊文献+

掠入射X射线散射法研究超光滑镜面粗糙度 被引量:1

Studies of the super-smooth mirror roughness by grazing incidence X-ray scattering method
原文传递
导出
摘要 在Xiaomin Tong等的理论上发展了一个二维理论模型,建立散射光强分布与超光滑表面功率谱密度(PSD)的关系。在上海同步辐射光源小角散射实验站上,用不同粗糙度的210 mm和320 mm长的超光滑反射镜进行掠入射X射线散射法(GIXRS)实验,测量散射分布并进行处理,计算出两块反射镜的表面均方根粗糙度(RMS)。与白光干涉法测量结果的比对结果表明,根据这种理论进行数据处理得到的RMS值,与白光干涉法的测量结果非常符合。 In this work, surface roughness of two large-size super-smooth mirrors, of 210 and 320 mm in length, was studied by grazing incidence X-ray scattering method (GIXRS). A two-dimensional theoretical model was derived based on Tong's result in 1993, so as to the correlate power spectrum density (PSD) of a mirror surface to the intensity distribution of X-ray scattering. The two mirrors were measured on Beamline 16B at Shanghai Synchrotron Radiation Facility and the data were analyzed. The results showed that the root mean square of the surface roughness calculated using the model agreed well with that measured by a white-light 3D profiler.
出处 《核技术》 CAS CSCD 北大核心 2012年第4期255-259,共5页 Nuclear Techniques
基金 国家青年科学基金项目(No.11105215)资助
关键词 功率谱密度(PSD) 均方根粗糙度(RMS) 掠入射X射线散射法(GIXRS) 超光滑表面 同步辐射光源 白光干涉法 Power Spectrum Density (PSD), Root Mean Square (RMS), 2D GIXRS, Super-smooth mirror,Synchrotron radiation, White-light 3D profiler
  • 相关文献

参考文献9

  • 1佐藤繁.同步辐射科学基础[M].上海:上海交通大学出版社,2010. 被引量:1
  • 2Hogrefe Henning, Kunz Christof. Soft X-ray scattering from rough surface: experimental and theoretical analysis[J]. Appl Opt, 1987, 26(4):2851-2859. 被引量:1
  • 3de Korte P A J, Laine R. Assessment of surface roughness by X-ray scattering and differential interference contrast microscopy[J]. Appl Opt, 1979, 18(2):236-242. 被引量:1
  • 4Kozhevnikov I V, Pyatakhin M V. Use of DWBA and perturbation theory in X-ray control of the surface roughness[J]. J X-Ray Sci Tech, 2000, 8:253-275. 被引量:1
  • 5王永刚,孟艳丽,马文生,陈斌,陈波.掠入射X射线散射法测量超光滑表面[J].光学精密工程,2010,18(1):60-68. 被引量:6
  • 6TONG Xiaomin, Hitoshi YAMAOKA, Tomoya URugA, Etsuo ARAKAWA. Theoretical Studies of the X-Ray Mirror Surface Roughness[J]. Jpn J Appl Phys, 1993, 32, 502-505. 被引量:1
  • 7徐德衍.现代光学检测技术与国际标准[M].北京:科学出版社,2009. 被引量:1
  • 8Yoneda Y. Anomalous Surface Reflection of X-Rays[J]. Phys. Rev., 1963, 131(5): 2010-2013. 被引量:1
  • 9李玉德,林晓燕,杜树成.X射线反射率的讨论[J].大学物理,2006,25(3):9-11. 被引量:2

二级参考文献24

  • 1陈淑妍,齐立红,陈波.光学散射法表面特征的测量与分析[J].红外与激光工程,2006,35(1):82-85. 被引量:12
  • 2WRISTON R S, FROECHTENIGT J F. Soft X-ray scattering by optical surfaces [J]. Applied Optics,1973,12(1):25-28. 被引量:1
  • 3HENSLER D H. Light scattering from fused polycrystalline aluminum oxide surfaces [J]. Applied Optics, 1972,11(11):2522-2528. 被引量:1
  • 4ELSON J M. Light scattering from semi-infinite media for non normal incidence [J]. Physical Review B, 1975,12(6) :2541-2542. 被引量:1
  • 5STOVER J C. Roughness characterization of smooth machined surfaces by light scattering [J]. Applied Optics, 1975,14(8) :1796-1802. 被引量:1
  • 6BAWOLEK E J, MOHR J B, HIRLEMAN E D, et al.. I.ight scatter from polysilicon and aluminum surfaces and comparison with surface roughness statistics by atomic force microscopy [J]. Applied Optics, 1993,32(19) :3377-3400. 被引量:1
  • 7SCHRODER S, GLIECH S, DUPARRE A. Measurement system to determine the total and angle resolved light scattering of optical components in the deep-ultraviolet and vacuum-ultraviolet spectral regions[J]. Applied Optics, 2005,44 (29): 6093- 6107. 被引量:1
  • 8DUPARRE A, BORRULL J F, GI.IECH S, et al.. Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components [J]. Applied Optics, 2002,41(1) :154-171. 被引量:1
  • 9PEGRO G R, KIM A D. Comparison of light scattering models for diffuse optical tomography[J]. Optical Express, 2009,17 ( 11 ) : 8756- 8774. 被引量:1
  • 10ASADCHIKOVA V E, KOZHEVNIKOV I V, KRIVONOSOV Y S, et al.. Application of X-ray scattering technique to the study of supersmooth surfaces [J]. Nuclear Instruments and Methods in Physics Research A, 2004,530 : 575- 595. 被引量:1

共引文献6

同被引文献8

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部