摘要
通过物理试验对锻件进行倒棱,在不同型砧倒棱过程中改变其边界条件,观察试件的变形情况,结果表明当梯形凸面砧中间凸起与坯料接触后,在油润滑的情况下,利用梯形凸面砧倒棱可使成形质量和力学性能达到最佳。
The chamfering of forgings was carried out by physical tests,in the chamfering process with different types of anvil changing its boundary conditions,the deformation of the specimen was observed.The results show that,in the conditions of oil lubricating,when the ladder type of convex anvil contact with the blank,chamfering with the use of ladder type of convex anvil can achieve the best forming quality and mechanical properties.
出处
《热加工工艺》
CSCD
北大核心
2012年第5期14-16,共3页
Hot Working Technology
基金
科技部国家重大专项项目(HZXY-800MN-0201-3)
关键词
锻件
梯形砧
倒棱
物理实验
forgings
trapezoid anvil
chamfering
physics experiment
