摘要
以三苯基膦、1,3-丙磺酸内酯和磷钨酸为原料,采用两步法合成了(3-磺酸丙基)三苯基膦磷钨酸盐催化剂(简写为[TPSPP]3PW12O40);采用ESI-MS,NMR,FTIR等方法对该催化剂进行了表征,并用其催化糠酸与正丁醇进行酯化反应;同时与多种Keggin型杂多酸及其盐、用浸渍法制备的SiO2负载型催化剂进行了催化性能比较;考察了催化剂用量、原料配比、油浴温度和反应时间对酯化反应的影响。实验结果表明,[TPSPP]3PW12O40具有很高的催化性能和较好的重复使用性能;糠酸与正丁醇进行酯化的适宜条件为:糠酸20 mmol,n([TPSPP]3PW12O40)∶n(正丁醇)∶n(糠酸)=0.005∶5.4∶1,油浴温度150℃,反应时间3 h;在此条件下,糠酸正丁酯的收率达到96.9%,催化剂可以循环使用4次。
（3-Sulfopropyl） triphenyl-phosphine phosphotungstate catalyst （ [ TPSPP] 3PW12 O40 ） was synthesized from triphenylphosphine, 1,3-propane sultone and phosphotungstic acid through two step reactions and characterized by means of ESI-MS, NMR and FTIR. Its catalytic performance in esterification of furoic acid with n-butanol to n-butyl furoate was evaluated. Several heteropoly compounds with Kegginstructure were prepared and supported on porous silica by impregnation. Their catalytic performances in the esterification were compared with [ TPSPP] 3PW12O40 catalyst. The effects of catalyst dosage, mole ratio between the reactants, oil bath temperature and reaction time on the n-butyl furoate yield were investigated. Under the optimal reaction conditions ： furoic acid 20 mmol, n （ [ TPSPP ] 3 PW12 O40 ） ： n（n-butanol） ： n（furoic acid） 0.005：5.4 ： 1, oil bath temperature 150 ℃ and reaction time 3 h, the n-butyl furoate yield could reach 96.9 % and the catalyst could be recycled four times.
出处
《石油化工》
CAS
CSCD
北大核心
2011年第10期1083-1088,共6页
Petrochemical Technology
基金
常州大学校基金项目
