摘要
利用化学镀方法在铜基片上施镀了Ｆｅ－Ａｌ－Ｐ合金镀层．通过改变金属盐比率ＡｌＣｌ３／（ＡｌＣｌ３＋ＦｅＳＯ４）、金属盐ＡｌＣｌ３和还原剂ＮａＨ２ＰＯ２的浓度等参数，研究了合金镀层的沉积速率、成分、表面形貌及结构的变化规律，得到了最佳镀液配方．发现络合剂和还原剂的选择是提高镀层含Ａｌ量的关键．
The Fe Al P alloy deposits were plated on copper sheets by electroless plating.The change law of the deposition rate,composition,surface appearance and structure for the deposits was studied by changing the metal salt ratio AlCl 3/(AlCl 3+FeSO 4),the concentration of metal salt AlCl 3 and reductant NaH 2PO 2.The optimum plating bath was obtained.It was found that the choices of ligand and reductant were the key of increasing Al content for the deposits.
出处
《湖南大学学报（自然科学版）》
EI
CAS
CSCD
1999年第2期12-15,共4页
Journal of Hunan University:Natural Sciences
基金
湖南省科委基金
关键词
化学镀
非晶态合金
铁合金
化学沉积
electroless plating,Fe Al P alloys,technology,structure
