期刊文献+

焦点位置的确定和H62黄铜激光焊接性的研究 被引量:4

Selecting Focus Position and Laser Weldability of H62 Brass
下载PDF
导出
摘要 研究了在不同焦点位置条件下激光焊接参数对H62黄铜焊缝金属的组织、硬度、化学成分、内部缺陷和焊态接头断裂强度的影响。结果表明,焦点位置是试板能否焊透的决定因素之一。一般情况下,激光焊接中首选焦点位置为零是适宜的。焦点位置对H62黄铜的接头(或焊缝金属)的性能和缺陷等具有重要影响,可以据此调节焦点位置。激光焊不是黄铜焊接的首选焊接方法。激光焊接H62时必须正确地控制焊接线能量范围和选择焦点位置。 The influence of welding parameters on structure, hardness, chemical composition, internal defects of weld metal and tensile strength of welding joint was studied under the condition of various focus position during the laser welding of H62 brass. The experimental results indicate that focus position is one of the decisive factors for the welds with complete penetration. As a general rule it is suitable to select that focus position equal zero. The influences of focus position on properties of welding joint (or weld metal) and internal defects are significant. Focus position can be regulated according to that relationship. The laser welding is not the most excellent method for H62 brass and it is prerequisite to control the welding heat input and focus position properly.
出处 《热加工工艺》 CSCD 北大核心 2008年第7期58-60,共3页 Hot Working Technology
关键词 激光焦点位置 H62黄铜 焊接性 focus position weldability H62 brass
  • 相关文献

参考文献3

二级参考文献6

共引文献31

同被引文献34

  • 1杨明海,杨晶.冷凝器Hsn70—1黄铜焊管焊接热裂纹问题的研究[J].机械设计与制造,2005(4):97-98. 被引量:4
  • 2陈虹,吴世凯,张正伟,陈铠,肖荣诗,左铁钏.高功率激光光束特性对激光加工的影响[J].光学技术,2006,32(6):834-837. 被引量:14
  • 3王运炎.机械工程材料[M].北京:机械工业出版社,1993. 被引量:1
  • 4F. Matsuda, H. Nakagawa, S. Minehisa et al.. Weldability of Fe 36%Ni (report I): hot cracking with cross-bead test [J]. Trans. JWRI, 1980, 9(2): 197-204. 被引量:1
  • 5Jose L. Corbacho, Juan C. Sudrez, Franeiseo Molleda. Grain coarsening and boundary migration during welding of invar Fe36Ni alloy[J]. Mater. Characterization, 1998, 41(1): 27-34. 被引量:1
  • 6Susumu Hongoh, Shuji Yamamoto, Kazuhiro Ogawa et al.. Development of LNG piping using invar alloy ( Ⅲ ) : Multi-pass GTAW process for thick joint of Fe-36%Ni alloy[J]. J. High Pressure Inst. Jpn. , 2003, 41(4): 160-167. 被引量:1
  • 7Bharat K. Jasthi, William J. Arbegast, Stanley M. Howard. Thermal expansion coefficient and mechanical properties of friction stir welded invar (Fe-36%Ni)[J]. J. Mater. Engng. & Performance, 2009, 18(7) : 925--934. 被引量:1
  • 8Hana Chmeliekova, Hana Sebestovtl. Pulsed Laser Welding [ OL ]. http://www, intechopen, com/books/nd-yag-laser/ pulsed-laser-welding. [2013-01-05]. 被引量:1
  • 9P. Satbiya, M. Y. Abdul Jaleel. Measurement of the bead profile and microstructural characterization of a CO2 laser welded AISI 904L super austenitic stainless steel [J]. Opt. & Laser Technol. , 2010, 42(6): 960-968. 被引量:1
  • 10皮友东,董鹏,杨武雄,肖荣诗.黄铜-低碳钢异种金属激光深熔钎焊[J].中国激光,2007,34(11):1562-1566. 被引量:15

引证文献4

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部