摘要
为了优化锥栗气体射流冲击脱壳工艺,采用响应曲面法分析了冲击温度(163～197℃)、加热时间(109～311s)及气流速度(6.68～9.73m/s)对于脱壳锥栗品质(失水率、脱壳率、色泽L*值)的影响,并建立了相应的预测模型。方差分析的结果表明:冲击温度、加热时间及气流速度对于失水率、脱壳率和色泽L*值这三项指标都有着极为显著的影响。优化所得的较优工艺参数为:冲击温度179℃,加热时间278s,气流速度7.83m/s。对应的失水率、脱壳率及色泽L*值的预测值分别为:4.14%、86.95%和58.65。经试验证明:应用响应曲面法所得到的脱壳工艺参数是可行的。
The objective of the study was to derive optimum conditions for castanea henryi shelling by using air-impingement shelling technology. Response surface methodology was employed to analyze the effects of impingement temperature （163 - 197℃）, heating time （109 - 311 s） and airflow rate （6.68-9.73 m/s） on the rate of water loss, shelling rate and L^＊ value. The prediction models were also established. The analysis of variance revealed that impingement temperature, heating time and airflow rate significantly （99.9% confidence level） affected response variables. Optimum conditions obtained were 179℃ of impingement temperature, 278 s of heating time and 7.83 m/s of airflow rate. Values predicted by the models for the rate of water loss, shelling rate and L^＊ under optimized conditions were 4.14%, 86.95% and 58.65 respectively. These values were experimentally verified, and good agreement between experimental and predicted values was obtained.
出处
《农业机械学报》
EI
CAS
CSCD
北大核心
2006年第4期71-75,67,共6页
Transactions of the Chinese Society for Agricultural Machinery
关键词
锥栗
脱壳工艺
气体射流冲击
响应曲面法
优化
Castanea henryi, Shelling, Air-impingement, Response surface methodology, Optimization
