摘要
通过实验和分析Lissajous图形,研究了线管结构的介质阻挡电晕放电,给出了放电功率及等效电容值,采用PSPICE软件对放电等效电路仿真,分析并比较了实测电流和仿真波形。研究表明,随外施电压上升,放电分别出现电晕放电以及稳定阻挡放电,放电功率密度可达数百mW/cm3。
The dielectric barrier corona discharge in a wire-cylinder reactor is studied. The discharge power and the equivalent capacitance of the reactor are given by analyzing the Lissajous figure. By using PSPICE software the discharge currents are simulated. The relations between measurement and simulation are shown. With the increasing applied voltage, the dielectric barrier corona discharges exhibit corona discharge and stable barrier discharge. The discharge power can reach hundreds mW/cm3.
出处
《高电压技术》
EI
CAS
CSCD
北大核心
2005年第6期49-51,共3页
High Voltage Engineering
基金
河南省教育厅自然科学基金资助(200510460009)
