To improve the energy resolution（？E） of Nb/Al superconducting tunnel junctions（STJs）, an ozone（O3） oxidation process has been developed to fabricate a thin defect-free tunnel barrier that simultaneously shows h...To improve the energy resolution（？E） of Nb/Al superconducting tunnel junctions（STJs）, an ozone（O3） oxidation process has been developed to fabricate a thin defect-free tunnel barrier that simultaneously shows high critical current JC〉 1000 A/cm^2 and high normalized dynamic resistance RDA 〉 100 MΩ·μm^2, where A is the size of the STJ. The 50-μm^2 STJs produced by O3 exposure of 0.26 Pa·min with an indirect spray of O3 gas, which is a much lower level of exposure than the O2 exposure used in a conventional O2 oxidation process, exhibit a maximum JC= 800 A/cm^2 and a high RDA = 372 MΩ ·μm^2. The 100-pixel array of the 100-μm^2STJs produced using the same O3 oxidation conditions exhibits a constant leak current I leak= 14.9 ± 3.2 n A at a bias point around △ /e（where e is half the energy gap of an STJ）,and a high fabrication yield of 87%. Although the I leak values are slightly larger than those of STJs produced using the conventional O2 oxidation process, the STJ produced using O3 oxidation shows a ？E = 10 eV for the C-Kα line, which is the best value of our Nb/Al STJ x-ray detectors.展开更多
The finite element polycrystal model (FEPM) was extended and applied to simulate the development of the cold rolling textures of matrix aluminum in deformation processed two-phase 10% and 20%Nb/Al(in volume fraction) ...The finite element polycrystal model (FEPM) was extended and applied to simulate the development of the cold rolling textures of matrix aluminum in deformation processed two-phase 10% and 20%Nb/Al(in volume fraction) metal-metal composites on the basis of slip deformation of individual grains. This simulation method can assure the continuity of stress and displacement at the boundary during heterogeneous deformation and take arbitrary boundary conditions into consideration. The starting hot-extruded textures, as initial input condition, were taken into account in the FEPM simulation. The simulation results show that the main texture components and their evolution after various cold rolling reductions in 10% and 20%Nb/Al metal-metal composites are well qualitatively in agreement with the experimental ones. The initially extruded textures are rather weak, so they have no much influence on the simulated final cold rolling textures of the matrix aluminum for Nb/Al composites.展开更多
文摘To improve the energy resolution（？E） of Nb/Al superconducting tunnel junctions（STJs）, an ozone（O3） oxidation process has been developed to fabricate a thin defect-free tunnel barrier that simultaneously shows high critical current JC〉 1000 A/cm^2 and high normalized dynamic resistance RDA 〉 100 MΩ·μm^2, where A is the size of the STJ. The 50-μm^2 STJs produced by O3 exposure of 0.26 Pa·min with an indirect spray of O3 gas, which is a much lower level of exposure than the O2 exposure used in a conventional O2 oxidation process, exhibit a maximum JC= 800 A/cm^2 and a high RDA = 372 MΩ ·μm^2. The 100-pixel array of the 100-μm^2STJs produced using the same O3 oxidation conditions exhibits a constant leak current I leak= 14.9 ± 3.2 n A at a bias point around △ /e（where e is half the energy gap of an STJ）,and a high fabrication yield of 87%. Although the I leak values are slightly larger than those of STJs produced using the conventional O2 oxidation process, the STJ produced using O3 oxidation shows a ？E = 10 eV for the C-Kα line, which is the best value of our Nb/Al STJ x-ray detectors.
文摘The finite element polycrystal model (FEPM) was extended and applied to simulate the development of the cold rolling textures of matrix aluminum in deformation processed two-phase 10% and 20%Nb/Al(in volume fraction) metal-metal composites on the basis of slip deformation of individual grains. This simulation method can assure the continuity of stress and displacement at the boundary during heterogeneous deformation and take arbitrary boundary conditions into consideration. The starting hot-extruded textures, as initial input condition, were taken into account in the FEPM simulation. The simulation results show that the main texture components and their evolution after various cold rolling reductions in 10% and 20%Nb/Al metal-metal composites are well qualitatively in agreement with the experimental ones. The initially extruded textures are rather weak, so they have no much influence on the simulated final cold rolling textures of the matrix aluminum for Nb/Al composites.
基金National Natural Science Foundation of China (51865012)Natural Science Foundation of Jiangxi Province (20202BABL204040)+3 种基金Open Foundation of National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials,China (2016005)Science Foundation of Educational Department of Jiangxi Province,China (GJJ170372)GF Basic Research Project,China (JCKY2016603C003)Research Project of Special Furnishment and Part,China (JPPT125GH038)。
