The solidification structure of Bi-3 wt pct Mn alloy grown up in the semisolid zone under the influence of a staticmagnetic field (up to 1.0 T) and the relation of the magnetic property with the solidification structu...The solidification structure of Bi-3 wt pct Mn alloy grown up in the semisolid zone under the influence of a staticmagnetic field (up to 1.0 T) and the relation of the magnetic property with the solidification structure have beeninvestigated experimentally. It was shown that the primary phase MnBi crystals in the alloy aligned and oriented alongthe direction of the applied magnetic field. The orientating tendency and the average length of the elongated MnBicrystals increased with the increase of the applied field and the solidification time. Moreover, the remanence of thealloy along the aligned direction of the MnBi phase in the case of solidification with a magnetic field was apparentlyanisotropic and nearly double of that without the magnetic field. This indicated that the MnBi crystals orientedand aligned along their easy magnetization axis. A model was proposed to explain the alignment and orientationgrowth of the MnBi crystals in a magnetic field in terms of the magnetic anisotropy of the crystals and the magneticinteraction between them.展开更多
Anisotropic MnBi/NdFeB （MnBi contents of 0 wt%, 20 wt%, 40 wt%, 60 wt%, 80 wt%, and 100 wt%） hybrid bonded magnets were prepared by molding compression using MnBi powders and commercial hydro-genation disproportiona...Anisotropic MnBi/NdFeB （MnBi contents of 0 wt%, 20 wt%, 40 wt%, 60 wt%, 80 wt%, and 100 wt%） hybrid bonded magnets were prepared by molding compression using MnBi powders and commercial hydro-genation disproportionation desorption and recombination （HDDR） NdFeB powders. Magnetic measurements at room temperature show that with MnBi content increasing, the magnetic properties of the MnBi/NdFeB hybrid bonded magnets all decrease gradually, while the density of the hybrid magnets improves almost linearly. In a temperature range of 293-398 K, the coercivity temperature coefficient of the hybrid magnets improves gradually from -0.59 %.K^-1 for the pure NdFeB bonded magnet to -0.32 %.K^-1 for the hybrid bonded magnet with 80 wt% MnBi, and the pure MnBi bonded magnet exhibits a positive coercivity temperature coefficient of 0.61%-K^-1.展开更多
Advanced permanent magnets based on rare-earth-free MnBi intermetallic alloys are considered energy-critical materials due to their applications in high temperature power electronics and green energy-related generator...Advanced permanent magnets based on rare-earth-free MnBi intermetallic alloys are considered energy-critical materials due to their applications in high temperature power electronics and green energy-related generators and motors, owing to their positive temperature coefficient of magnetic anisotropy. However, a direct method to achieve high saturation magnetization, without the significant loss of coercivity, is critical for attaining high performance MnBi magnets. Here, we demonstrate the synthesis and processing of magnetic nanocomposites, consisting of metal-redox MnBi nanoparticles and electro-spun FeCo nanowires. The composition ratio, processing dependent magnetism, and increased coercivity with increasing temperature, were studied in MnBi-FeCo nanocomposites. The magnetic performance of nanocomposites was dictated by interfacial coupling between magnetically hard MnBi and semi-hard FeCo nanowires, as well as the composition ratio and processing conditions. Solution processed MnBi-FeCo nanocomposites allow the potential for the development of high temperature and high performance rare-earth-free permanent magnets.展开更多
Operating diamond grits to produce a precise grind tool is need. In order to lift up a diamond grit by magnetic force, the magnetic flux was estimated to be 100 μT/g. Diamond (110) surface was modified with manganese...Operating diamond grits to produce a precise grind tool is need. In order to lift up a diamond grit by magnetic force, the magnetic flux was estimated to be 100 μT/g. Diamond (110) surface was modified with manganese powder at 450<span style="white-space:nowrap;">°</span>C (720 K) then with bismuth powder at 270<span style="white-space:nowrap;">°</span>C (540 K) due to its low melting temperature. Manganese carbides were formed on the diamond surface which was confirmed by an X-ray diffraction. A magnet that exhibits ferrimagnetism was formed on the surface, it had a spontaneous magnetism. We conducted to form six small disk magnets at hexagonal apex positions on the diamond (110) by using gold film mask. The magnetic flux measured at the center of the hexagon magnets on was 232 μT at room temperature, and the surface modified diamond grid could be lifted up in the magnetic field between two solenoid coils.展开更多
Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoerciviti...Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoercivities of the MnBi/Bi film are 1.5 T and 2.35 T at room temperature and at 373K, respectively, showing a positive temperature coefficient. Microstructural investigations show that the textured MnBi film results from the orientated growth induced by the textured Bi under-layer.展开更多
Bi Mn过共晶合金分别从3个不同状态凝固,合金中MnBi析出相均在磁场作用下以晶体的c轴平行磁场取向,形成规则排列组织,并且所得材料的剩磁都具有明显的各向异性。合金从低于355℃的固液两相区凝固时,铁磁性MnBi析出相在1.0T磁场中迅速... Bi Mn过共晶合金分别从3个不同状态凝固,合金中MnBi析出相均在磁场作用下以晶体的c轴平行磁场取向,形成规则排列组织,并且所得材料的剩磁都具有明显的各向异性。合金从低于355℃的固液两相区凝固时,铁磁性MnBi析出相在1.0T磁场中迅速形成均布的织构组织,并能在无磁场条件下保持稳定,材料无需热处理就有很好的剩磁性能。因此,磁场凝固技术能够高效率地、直接制备出性能优良的MnBi/Bi磁性功能复合材料。展开更多
基金This work was supported by the National Natural Science Foundation of China(No.59871026,50225416,50234020)“Shu Guang”Shanghai Education Development Foundation(No.98SG37).
文摘The solidification structure of Bi-3 wt pct Mn alloy grown up in the semisolid zone under the influence of a staticmagnetic field (up to 1.0 T) and the relation of the magnetic property with the solidification structure have beeninvestigated experimentally. It was shown that the primary phase MnBi crystals in the alloy aligned and oriented alongthe direction of the applied magnetic field. The orientating tendency and the average length of the elongated MnBicrystals increased with the increase of the applied field and the solidification time. Moreover, the remanence of thealloy along the aligned direction of the MnBi phase in the case of solidification with a magnetic field was apparentlyanisotropic and nearly double of that without the magnetic field. This indicated that the MnBi crystals orientedand aligned along their easy magnetization axis. A model was proposed to explain the alignment and orientationgrowth of the MnBi crystals in a magnetic field in terms of the magnetic anisotropy of the crystals and the magneticinteraction between them.
基金financially supported by the National Natural Science Foundation of China(No.51271005)the Beijing Municipal Natural Science Foundation(No.2122006)+2 种基金the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry(No.32009001201301)the Project from Samsung Advanced Institute of Technology(No.46009001201402)the Fundamental Research Foundation of Beijing University of Technology(No.009000514313002)
文摘Anisotropic MnBi/NdFeB （MnBi contents of 0 wt%, 20 wt%, 40 wt%, 60 wt%, 80 wt%, and 100 wt%） hybrid bonded magnets were prepared by molding compression using MnBi powders and commercial hydro-genation disproportionation desorption and recombination （HDDR） NdFeB powders. Magnetic measurements at room temperature show that with MnBi content increasing, the magnetic properties of the MnBi/NdFeB hybrid bonded magnets all decrease gradually, while the density of the hybrid magnets improves almost linearly. In a temperature range of 293-398 K, the coercivity temperature coefficient of the hybrid magnets improves gradually from -0.59 %.K^-1 for the pure NdFeB bonded magnet to -0.32 %.K^-1 for the hybrid bonded magnet with 80 wt% MnBi, and the pure MnBi bonded magnet exhibits a positive coercivity temperature coefficient of 0.61%-K^-1.
基金We thank the financial support from the U.S. National Science Foundation （NSF） under the CAREER Award No： NSF-DMR-1551948. This work is also supported by U.S. Army Communications-Electronic Research, Development and Engineering Center （CERDEC） Command Power and Integration Directorate （CP ＆ ID） via subcontract through General Technical Services under Grant # GTS-S-15-030.
文摘Advanced permanent magnets based on rare-earth-free MnBi intermetallic alloys are considered energy-critical materials due to their applications in high temperature power electronics and green energy-related generators and motors, owing to their positive temperature coefficient of magnetic anisotropy. However, a direct method to achieve high saturation magnetization, without the significant loss of coercivity, is critical for attaining high performance MnBi magnets. Here, we demonstrate the synthesis and processing of magnetic nanocomposites, consisting of metal-redox MnBi nanoparticles and electro-spun FeCo nanowires. The composition ratio, processing dependent magnetism, and increased coercivity with increasing temperature, were studied in MnBi-FeCo nanocomposites. The magnetic performance of nanocomposites was dictated by interfacial coupling between magnetically hard MnBi and semi-hard FeCo nanowires, as well as the composition ratio and processing conditions. Solution processed MnBi-FeCo nanocomposites allow the potential for the development of high temperature and high performance rare-earth-free permanent magnets.
文摘Operating diamond grits to produce a precise grind tool is need. In order to lift up a diamond grit by magnetic force, the magnetic flux was estimated to be 100 μT/g. Diamond (110) surface was modified with manganese powder at 450<span style="white-space:nowrap;">°</span>C (720 K) then with bismuth powder at 270<span style="white-space:nowrap;">°</span>C (540 K) due to its low melting temperature. Manganese carbides were formed on the diamond surface which was confirmed by an X-ray diffraction. A magnet that exhibits ferrimagnetism was formed on the surface, it had a spontaneous magnetism. We conducted to form six small disk magnets at hexagonal apex positions on the diamond (110) by using gold film mask. The magnetic flux measured at the center of the hexagon magnets on was 232 μT at room temperature, and the surface modified diamond grid could be lifted up in the magnetic field between two solenoid coils.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51171001,51371009 and 50971003the Foundation of Key Laboratory of Neutron Physics of CAEP under Grant No 2014BB02
文摘Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoercivities of the MnBi/Bi film are 1.5 T and 2.35 T at room temperature and at 373K, respectively, showing a positive temperature coefficient. Microstructural investigations show that the textured MnBi film results from the orientated growth induced by the textured Bi under-layer.
文摘 Bi Mn过共晶合金分别从3个不同状态凝固,合金中MnBi析出相均在磁场作用下以晶体的c轴平行磁场取向,形成规则排列组织,并且所得材料的剩磁都具有明显的各向异性。合金从低于355℃的固液两相区凝固时,铁磁性MnBi析出相在1.0T磁场中迅速形成均布的织构组织,并能在无磁场条件下保持稳定,材料无需热处理就有很好的剩磁性能。因此,磁场凝固技术能够高效率地、直接制备出性能优良的MnBi/Bi磁性功能复合材料。
