Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, ...Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, the high TEC phase leucite (KAlSi2 O6) in the high TEC porcelain was prepared by sol-gel method. The crystal size of leucite made by sol-gel is about 77nm through controlling the process parameters. The process from xerogel to leucite was investigated by means of DSC (differential scanning calorimetry), TG (thermogravimetry), XRD ( X-ray diffraction) and IR (infrared absorption spectrum). Leucite had been detected after the gel was treated at 900℃, this formation temperature is about 250℃ lower than that of melting method. The porcelain made from 50% of the leucite powder and 50% of low fused temperature frit has an average TEC of 19.2×10-6/℃ C from room temperature to 450℃, which is much higher than the common porcelains.展开更多
Leucite particles were synthesized from feldspar mixed with 0% to 52% potassium nitrate fired from 800 ℃ to 1 200 ℃ by solid state method. The X-ray Diffraction （XRD） patterns show that in the temperature range fr...Leucite particles were synthesized from feldspar mixed with 0% to 52% potassium nitrate fired from 800 ℃ to 1 200 ℃ by solid state method. The X-ray Diffraction （XRD） patterns show that in the temperature range from 800 ℃ to 1 200 ℃, the leucite can be removed as the single crystalline phase. Kalsilite may be crystallized with leucite at 800 ℃, but can be eliminated after prolonged heating. The scanning electron Microscopy （SEM） images clearly display the that crystals of micrometer scale leucite, and the leucite crystals distribute evenly in the matrix. The Thermal expansion coefficient （TEC） of the samples fabricated is as high as 20.52×10^-6 ℃^-1 measured from 20 ℃ to 500 ℃. The mechanism of transformation from feldspar to leucite was proposed.展开更多
Phase relationship of the system Ne-Ks-Q-H<sub>2</sub>O at P<sub>H<sub>2</sub>O</sub>= 5 kbar under water-saturated condition has been investigated. Compared with the phase diagrams...Phase relationship of the system Ne-Ks-Q-H<sub>2</sub>O at P<sub>H<sub>2</sub>O</sub>= 5 kbar under water-saturated condition has been investigated. Compared with the phase diagrams at 1 atmosphere, 1 kbar and 2 kbar, the primary field of leucite shrinks with increasing pressure. The leucite field of the system Ne-Ks-Q-H<sub>2</sub>O at P<sub>H<sub>2</sub>O</sub>= 5 kbar under water-deficient conditions has展开更多
In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ...In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).展开更多
基金This research was funded by the National High Technology Research and Development Program of China(Grant No.2002AA302204)Science and Technology Program of Guangdong Provrince of China(Grant No.2001A1070102).
文摘Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, the high TEC phase leucite (KAlSi2 O6) in the high TEC porcelain was prepared by sol-gel method. The crystal size of leucite made by sol-gel is about 77nm through controlling the process parameters. The process from xerogel to leucite was investigated by means of DSC (differential scanning calorimetry), TG (thermogravimetry), XRD ( X-ray diffraction) and IR (infrared absorption spectrum). Leucite had been detected after the gel was treated at 900℃, this formation temperature is about 250℃ lower than that of melting method. The porcelain made from 50% of the leucite powder and 50% of low fused temperature frit has an average TEC of 19.2×10-6/℃ C from room temperature to 450℃, which is much higher than the common porcelains.
基金the National High Technology Research and Development Program of China(No.2002AA302204)Science and Technology Program of Guangdong Province of China(No.2001A1070102)Science and Technology Program of Guangzhou City of China
文摘Leucite particles were synthesized from feldspar mixed with 0% to 52% potassium nitrate fired from 800 ℃ to 1 200 ℃ by solid state method. The X-ray Diffraction （XRD） patterns show that in the temperature range from 800 ℃ to 1 200 ℃, the leucite can be removed as the single crystalline phase. Kalsilite may be crystallized with leucite at 800 ℃, but can be eliminated after prolonged heating. The scanning electron Microscopy （SEM） images clearly display the that crystals of micrometer scale leucite, and the leucite crystals distribute evenly in the matrix. The Thermal expansion coefficient （TEC） of the samples fabricated is as high as 20.52×10^-6 ℃^-1 measured from 20 ℃ to 500 ℃. The mechanism of transformation from feldspar to leucite was proposed.
文摘Phase relationship of the system Ne-Ks-Q-H<sub>2</sub>O at P<sub>H<sub>2</sub>O</sub>= 5 kbar under water-saturated condition has been investigated. Compared with the phase diagrams at 1 atmosphere, 1 kbar and 2 kbar, the primary field of leucite shrinks with increasing pressure. The leucite field of the system Ne-Ks-Q-H<sub>2</sub>O at P<sub>H<sub>2</sub>O</sub>= 5 kbar under water-deficient conditions has
基金Funded by State Key Laboratory of Silicate Materials for Ar-chitectures(Wuhan University of Technology)(No.2011DA105356)。
文摘In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).
