Ti/TiO2 electrodes were prepared with the polymeric precursor method (PPM). The structure and morphology of Ti/TiO2 electrodes were examined with XRD and ESEM. The voltammetric charge (q*) of Ti/TiO2 electrodes as cat...Ti/TiO2 electrodes were prepared with the polymeric precursor method (PPM). The structure and morphology of Ti/TiO2 electrodes were examined with XRD and ESEM. The voltammetric charge (q*) of Ti/TiO2 electrodes as cathode in 0.5 mol/L H2SO4 solution was investigated with cyclic voltammetry. It was found that the electrocatalytic activity of the Ti/TiO2 electrodes was affected by the structure and morphology of the Ti/TiO2 electrodes, in other words, was affected by the calcination conditions of preparing the electrodes. The value of q*ln was considerably larger than that of q*out,which means that the 'inner' active surface area was much larger than the 'outer' active surface area, and
'inner' active surface played a main role in the electrocatalytic activity of the Ti/TiO2 electrodes.展开更多
The Ti/SnO2+Sb2O3/PbO2 anode with SnO2+Sb2O3 intermediate layer obtained by the polymeric precursor method (PPM) and with the conventional route was studied. The morphology and microstructure of SnO2+Sb2O3 intermediat...The Ti/SnO2+Sb2O3/PbO2 anode with SnO2+Sb2O3 intermediate layer obtained by the polymeric precursor method (PPM) and with the conventional route was studied. The morphology and microstructure of SnO2+Sb2O3 intermediate layer derived from different precursors and the top PbO2 active layer were examined by means of ESEM and XRD. The lifetime and electrocatalytic activity of the anode were also assessed by the cyclic voltammetry and accelerated lifetime test in 1.0 mol/L H2SO4 solution. It was found that precursor solvents affected lifetime, microstructure and morphology of the anode, and had little influence on electrocatalysis activity of the electrodes. The accelerated lifetime of Ti/SnO2+Sb2O3/PbO2 anode with intermediate layer prepared by PPM was 29.5 h in 1.0 mol/L H2SO4 solution, which was respectively about four times and twice that of the anode prepared with ethylene glycol and ethanol. After the anode was subjected to thermal corrosion, the lifetime still reached 27 h in contrast to the others.展开更多
A new type of ultraviolet photo-detectors （UVPDs） based on a bundle of highly aligned SiC nanowires was fabricated and the photo-electric properties of the UVPDs including 1-V characteristics and time response were ...A new type of ultraviolet photo-detectors （UVPDs） based on a bundle of highly aligned SiC nanowires was fabricated and the photo-electric properties of the UVPDs including 1-V characteristics and time response were studied in this work. SiC nan- owires were prepared by pyrolysis of a polymer precursor with ferrocene as the catalyst by a CVD route. The diameters of SiC nanowires varied from 100 to 200 nm while they were some centimeters long and the SiC nanowires were with zinc blended cubic form （β-SiC） tested by X-ray diffraction. A bundle of nanowires was fixed onto two legs＇ base by conductive silver paste to form the UVPDs. The electrical measurement of the device showed a significant increase of current when the device was exposed to 254 nm UV light, and the rising time of the device is very short, but the falling time is relatively long. Our results show that the UVPDs based on SiC nanowires have excellent electrical and optical properties which can be potentially applied.展开更多
采用热裂解聚合物前驱体法制备出了具有竹节结构的Si B C N纳米材料。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明样品具有特殊的竹节状(叠杯状)形貌,电子散射能谱(EDX)证实了样品组分为Si、B、C、N。通过微区喇曼光谱仪研究了...采用热裂解聚合物前驱体法制备出了具有竹节结构的Si B C N纳米材料。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明样品具有特殊的竹节状(叠杯状)形貌,电子散射能谱(EDX)证实了样品组分为Si、B、C、N。通过微区喇曼光谱仪研究了样品在488nm激光激发下从84～290K的变温发射特性,在490～800nm观察到位于580,620nm附近两个较强发射峰和740nm附近一个弱的发射峰。变温实验说明相应发射峰与材料禁带中形成的杂质能级有关。展开更多
基金Supported by the National Natural Science Foundation of China(No.20176047)Supported by the Natural Science Foundation of the Education Department of Jiangsu Province (No.03KJB530164)
文摘Ti/TiO2 electrodes were prepared with the polymeric precursor method (PPM). The structure and morphology of Ti/TiO2 electrodes were examined with XRD and ESEM. The voltammetric charge (q*) of Ti/TiO2 electrodes as cathode in 0.5 mol/L H2SO4 solution was investigated with cyclic voltammetry. It was found that the electrocatalytic activity of the Ti/TiO2 electrodes was affected by the structure and morphology of the Ti/TiO2 electrodes, in other words, was affected by the calcination conditions of preparing the electrodes. The value of q*ln was considerably larger than that of q*out,which means that the 'inner' active surface area was much larger than the 'outer' active surface area, and
'inner' active surface played a main role in the electrocatalytic activity of the Ti/TiO2 electrodes.
基金Supported by the National Natural Science Foundation of China (No. 20176047)
文摘The Ti/SnO2+Sb2O3/PbO2 anode with SnO2+Sb2O3 intermediate layer obtained by the polymeric precursor method (PPM) and with the conventional route was studied. The morphology and microstructure of SnO2+Sb2O3 intermediate layer derived from different precursors and the top PbO2 active layer were examined by means of ESEM and XRD. The lifetime and electrocatalytic activity of the anode were also assessed by the cyclic voltammetry and accelerated lifetime test in 1.0 mol/L H2SO4 solution. It was found that precursor solvents affected lifetime, microstructure and morphology of the anode, and had little influence on electrocatalysis activity of the electrodes. The accelerated lifetime of Ti/SnO2+Sb2O3/PbO2 anode with intermediate layer prepared by PPM was 29.5 h in 1.0 mol/L H2SO4 solution, which was respectively about four times and twice that of the anode prepared with ethylene glycol and ethanol. After the anode was subjected to thermal corrosion, the lifetime still reached 27 h in contrast to the others.
基金the National Natural Science Foundation of China (Grant No. 11104348)the School Pre-research of National University of Defense Technology (Grant No. JC11-02-08) for the financial support to this work
文摘A new type of ultraviolet photo-detectors （UVPDs） based on a bundle of highly aligned SiC nanowires was fabricated and the photo-electric properties of the UVPDs including 1-V characteristics and time response were studied in this work. SiC nan- owires were prepared by pyrolysis of a polymer precursor with ferrocene as the catalyst by a CVD route. The diameters of SiC nanowires varied from 100 to 200 nm while they were some centimeters long and the SiC nanowires were with zinc blended cubic form （β-SiC） tested by X-ray diffraction. A bundle of nanowires was fixed onto two legs＇ base by conductive silver paste to form the UVPDs. The electrical measurement of the device showed a significant increase of current when the device was exposed to 254 nm UV light, and the rising time of the device is very short, but the falling time is relatively long. Our results show that the UVPDs based on SiC nanowires have excellent electrical and optical properties which can be potentially applied.
文摘采用热裂解聚合物前驱体法制备出了具有竹节结构的Si B C N纳米材料。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明样品具有特殊的竹节状(叠杯状)形貌,电子散射能谱(EDX)证实了样品组分为Si、B、C、N。通过微区喇曼光谱仪研究了样品在488nm激光激发下从84～290K的变温发射特性,在490～800nm观察到位于580,620nm附近两个较强发射峰和740nm附近一个弱的发射峰。变温实验说明相应发射峰与材料禁带中形成的杂质能级有关。
