The handling efficiency of container terminal may be affected by variables of vessel calls, loading and discharge of container in the terminal. Some of the previous studies indicated that the performance of ship opera...The handling efficiency of container terminal may be affected by variables of vessel calls, loading and discharge of container in the terminal. Some of the previous studies indicated that the performance of ship operation would be affected by variables of vessel calls, such as ship size, container loaded and container discharged would affect the handling rate of ship operation, but it didn’t clarify on the degree of relationship and lack of variable container shifted/restowed. Therefore, this study would further study on the softcoming, to analyse the relationship between variables of vessel calls with berth turnaround time, that affected the ship operation’s performance. Extensive observation and survey activities were conducted at Malaysian’s Port and the collected data was based on ship operation delay parameters;like berth turnaround time, total move, total discharge, total load, shift/restow, and length overall of vessels. The initial result showed that total move, total discharge and total load had high correlation with berth turnaround time. The r-value of total move, total discharge and total load are 0.877, 0.716 and 0.804 respectively. Therefore, this study concluded that the berth turnaround time is highly affected by total move, total discharge and total load. Consequently, the research output would be as a decision making tool to port planner.展开更多
Results obtained from an experbontal study of the threedimensional flow survey within and exit of a large defiection linear turbine cascade are presented for a tip clearance levels of 0.08, 1.5, 3.0 percent of chord a...Results obtained from an experbontal study of the threedimensional flow survey within and exit of a large defiection linear turbine cascade are presented for a tip clearance levels of 0.08, 1.5, 3.0 percent of chord and compared with the help of boundary layer probes and that within and exit of a blade passage was done with a miniaturised five hole probe. End wall and blade tip surface static pressures were also obtained, in addition to flow visualisation studies. A strong horse-shoe vortex forms in front of the leading edge for zero clearance whereas this vortex does not appear for 3 percent clearance indicating that for large clearance the pressure forces have dominating infiuence than the viscous forces. In addition to normally known clearance vortex, a small tip separation vortex was noticed on the blade tip surface inside the tip gap. Due to the area contraction caused by the tip separation vortex, the fluid movign towards the tip gap from the pressure side is accelerated. Downstream of the vortex, the endwall pressure increases due to flow mixing. Both vortices increase in size and strength along the chord. The miring is incomplete in the aft portion of the blade. The tip gap velocity profiles exhibit wak like characteristics especially at axial positions where the mixing is incomplete. The passage vortex in the present investigations did not diminish with increase in clearance. The discharge coefhcient and the total pressure loss coefficient within the tip gap show similar tendency with lower values near the leading and trailing edge regions.展开更多
With the increasing application of electric and electronic devices in space and nuclear power stations, the polymeric insulation materials are inevitably exposed to various kinds of environments. Accordingly, it becom...With the increasing application of electric and electronic devices in space and nuclear power stations, the polymeric insulation materials are inevitably exposed to various kinds of environments. Accordingly, it becomes necessary to investigate the effects of the radiation and air pressure on insulation materials. This paper describes the effects of gamma-ray irradiation and reduced pressure on dielectric breakdown of polybutylene naphthalate (PBN) and polybutylene terephthalate (PBT) by applying a DC pulse voltage. Both PBN and PBT were irradiated in air up to 100 kGy and then up to 1 000 kGy with a dose rate of 10 kGy/h by using a60Co gamma-source. The effects of total dose and reduced pressure on the time to dielectric breakdown and discharge quantity were discussed. Obtained results show that, while increasing the total dose, the discharge quantity decreased with PBN, but increased with PBT. With decreasing the air pressure, the discharge quantity increased with PBN, but decreased with PBT. With increasing the total dose, the time to dielectric breakdown increased with PBN, but decreased with PBT. With decreasing the air pressure, the time to dielectric breakdown increased with both PBN and PBT. The experimental results suggest that the chemical structure of polybutylene polymers plays a main role in the result of radiation reaction, which is related to cross-linking and degradation reaction.展开更多
Petroleum based oils,the so-called mineral oils,are used for impregnating solid insulations or filling products of very large number of electric materials:transformers,reactors,cables,bushings,circuit breakers,tap cha...Petroleum based oils,the so-called mineral oils,are used for impregnating solid insulations or filling products of very large number of electric materials:transformers,reactors,cables,bushings,circuit breakers,tap changers, etc.In these equipments,oil is exposed to electrical stress and may experience electrical discharges under certain circumstances.Since the electrical stress is unavoidable in power equipments,the ability of oil to resist decomposition under electrical stress is of great importance for the safety of these devices.Electrical stress together with heat and moisture,in the presence of oxygen,oxidises the oil producing free radicals,acids and sludge that are deleterious to the transformer.In this paper,the effect of electrical discharges on oil properties is reported.The results indicate that quality of oil is considerably affected with increasing voltage stress.Comparing oil properties before and after voltage application allows assessing the outcome of random secondary chemical reactions between large oil born free radicals.展开更多
文摘The handling efficiency of container terminal may be affected by variables of vessel calls, loading and discharge of container in the terminal. Some of the previous studies indicated that the performance of ship operation would be affected by variables of vessel calls, such as ship size, container loaded and container discharged would affect the handling rate of ship operation, but it didn’t clarify on the degree of relationship and lack of variable container shifted/restowed. Therefore, this study would further study on the softcoming, to analyse the relationship between variables of vessel calls with berth turnaround time, that affected the ship operation’s performance. Extensive observation and survey activities were conducted at Malaysian’s Port and the collected data was based on ship operation delay parameters;like berth turnaround time, total move, total discharge, total load, shift/restow, and length overall of vessels. The initial result showed that total move, total discharge and total load had high correlation with berth turnaround time. The r-value of total move, total discharge and total load are 0.877, 0.716 and 0.804 respectively. Therefore, this study concluded that the berth turnaround time is highly affected by total move, total discharge and total load. Consequently, the research output would be as a decision making tool to port planner.
文摘Results obtained from an experbontal study of the threedimensional flow survey within and exit of a large defiection linear turbine cascade are presented for a tip clearance levels of 0.08, 1.5, 3.0 percent of chord and compared with the help of boundary layer probes and that within and exit of a blade passage was done with a miniaturised five hole probe. End wall and blade tip surface static pressures were also obtained, in addition to flow visualisation studies. A strong horse-shoe vortex forms in front of the leading edge for zero clearance whereas this vortex does not appear for 3 percent clearance indicating that for large clearance the pressure forces have dominating infiuence than the viscous forces. In addition to normally known clearance vortex, a small tip separation vortex was noticed on the blade tip surface inside the tip gap. Due to the area contraction caused by the tip separation vortex, the fluid movign towards the tip gap from the pressure side is accelerated. Downstream of the vortex, the endwall pressure increases due to flow mixing. Both vortices increase in size and strength along the chord. The miring is incomplete in the aft portion of the blade. The tip gap velocity profiles exhibit wak like characteristics especially at axial positions where the mixing is incomplete. The passage vortex in the present investigations did not diminish with increase in clearance. The discharge coefhcient and the total pressure loss coefficient within the tip gap show similar tendency with lower values near the leading and trailing edge regions.
基金Supported bythe Doctoral Foundation of Education Ministry of China (No.20040056037) .
文摘With the increasing application of electric and electronic devices in space and nuclear power stations, the polymeric insulation materials are inevitably exposed to various kinds of environments. Accordingly, it becomes necessary to investigate the effects of the radiation and air pressure on insulation materials. This paper describes the effects of gamma-ray irradiation and reduced pressure on dielectric breakdown of polybutylene naphthalate (PBN) and polybutylene terephthalate (PBT) by applying a DC pulse voltage. Both PBN and PBT were irradiated in air up to 100 kGy and then up to 1 000 kGy with a dose rate of 10 kGy/h by using a60Co gamma-source. The effects of total dose and reduced pressure on the time to dielectric breakdown and discharge quantity were discussed. Obtained results show that, while increasing the total dose, the discharge quantity decreased with PBN, but increased with PBT. With decreasing the air pressure, the discharge quantity increased with PBN, but decreased with PBT. With increasing the total dose, the time to dielectric breakdown increased with PBN, but decreased with PBT. With decreasing the air pressure, the time to dielectric breakdown increased with both PBN and PBT. The experimental results suggest that the chemical structure of polybutylene polymers plays a main role in the result of radiation reaction, which is related to cross-linking and degradation reaction.
文摘Petroleum based oils,the so-called mineral oils,are used for impregnating solid insulations or filling products of very large number of electric materials:transformers,reactors,cables,bushings,circuit breakers,tap changers, etc.In these equipments,oil is exposed to electrical stress and may experience electrical discharges under certain circumstances.Since the electrical stress is unavoidable in power equipments,the ability of oil to resist decomposition under electrical stress is of great importance for the safety of these devices.Electrical stress together with heat and moisture,in the presence of oxygen,oxidises the oil producing free radicals,acids and sludge that are deleterious to the transformer.In this paper,the effect of electrical discharges on oil properties is reported.The results indicate that quality of oil is considerably affected with increasing voltage stress.Comparing oil properties before and after voltage application allows assessing the outcome of random secondary chemical reactions between large oil born free radicals.
