In this study,a new method was developed to realize two-dimensional(2D)figure correction of grazing-incidence X-ray mirrors using a one-dimensional(1D)ion-beam figuring system.A mask of holes was specifically designed...In this study,a new method was developed to realize two-dimensional(2D)figure correction of grazing-incidence X-ray mirrors using a one-dimensional(1D)ion-beam figuring system.A mask of holes was specifically designed to generate removal functions at different widths and extend the figuring capability over a wide area.Accordingly,a long mirror could be manufactured.Using this method,the surface height root-mean-square(RMS)error of the center area of 484 mm×16 mm was reduced from 11.49 nm to 2.01 nm,and the 1D meridional RMS error reached 1.0 nm.The proposed method exhibits high precision and cost effectiveness for production of long X-ray mirrors.展开更多
The authors regret<that the published version of the above article contained an error in Figure 5d,which was not identified during the proofing stage.The Figure 5d has been revised as follow.The authors would like ...The authors regret<that the published version of the above article contained an error in Figure 5d,which was not identified during the proofing stage.The Figure 5d has been revised as follow.The authors would like to apologise for any inconvenience caused and state that the correction does not change the scientific conclusions of the article in any way.展开更多
In the process of collating the raw data,the authors noticed two inadvertent mistakes occurred in Fig.4b and Fig.6g(and the corresponding uncropped images in“Supplementary Data 2-Figure 6g”)that need to be corrected...In the process of collating the raw data,the authors noticed two inadvertent mistakes occurred in Fig.4b and Fig.6g(and the corresponding uncropped images in“Supplementary Data 2-Figure 6g”)that need to be corrected after online publication of the article1.The correct data are provided as follows.The key findings of the article are not affected by these corrections.The original article has been corrected.展开更多
(Molecular Plant 14,1343–1361;August 22021)During the revision of the manuscript above,we inadvertently duplicated the picture of ta1 complementation transgenic seed from Figure 3D8 into Figure 1B5 and incorrectly sp...(Molecular Plant 14,1343–1361;August 22021)During the revision of the manuscript above,we inadvertently duplicated the picture of ta1 complementation transgenic seed from Figure 3D8 into Figure 1B5 and incorrectly specified that it was a picture of the wild type.The picture of Figure 1B5 was correct in the original submission,and no comments or suggestions were made from either the editors or the reviewers regarding the pictures involved.This image correction does not affect the figure legends,results,or any of the conclusions.Figure 1B5 has thus been rectified in the corrected picture below.The authors apologize for the error.展开更多
In[1],the following corrections should be noted.[Figure 3 was unclear in the published version of the above paper.An updated version of Figure 3 is provided below].
In this article,published online on 15 June 2015,there was an unintended error during the image processing of Figs.2 and 4.In Fig.2c,the time point 12 h was omitted and is included in the corrected Fig.2c.Figure 4a an...In this article,published online on 15 June 2015,there was an unintended error during the image processing of Figs.2 and 4.In Fig.2c,the time point 12 h was omitted and is included in the corrected Fig.2c.Figure 4a and b contain blots not intended for that experiment,which now have been replaced with the blots generated for that experiment.The conclusions drawn from the presented experiments remain unaltered,and this correction has no bearing on the final outcome of the study.The inconvenience caused by this error is deeply regretted.展开更多
基金supported by the National Key R&D Program of China(Grant No.2022YFF0709101)the National Natural Science Foundation of China(Grant No.12235011).
文摘In this study,a new method was developed to realize two-dimensional(2D)figure correction of grazing-incidence X-ray mirrors using a one-dimensional(1D)ion-beam figuring system.A mask of holes was specifically designed to generate removal functions at different widths and extend the figuring capability over a wide area.Accordingly,a long mirror could be manufactured.Using this method,the surface height root-mean-square(RMS)error of the center area of 484 mm×16 mm was reduced from 11.49 nm to 2.01 nm,and the 1D meridional RMS error reached 1.0 nm.The proposed method exhibits high precision and cost effectiveness for production of long X-ray mirrors.
文摘The authors regret<that the published version of the above article contained an error in Figure 5d,which was not identified during the proofing stage.The Figure 5d has been revised as follow.The authors would like to apologise for any inconvenience caused and state that the correction does not change the scientific conclusions of the article in any way.
文摘In the process of collating the raw data,the authors noticed two inadvertent mistakes occurred in Fig.4b and Fig.6g(and the corresponding uncropped images in“Supplementary Data 2-Figure 6g”)that need to be corrected after online publication of the article1.The correct data are provided as follows.The key findings of the article are not affected by these corrections.The original article has been corrected.
文摘(Molecular Plant 14,1343–1361;August 22021)During the revision of the manuscript above,we inadvertently duplicated the picture of ta1 complementation transgenic seed from Figure 3D8 into Figure 1B5 and incorrectly specified that it was a picture of the wild type.The picture of Figure 1B5 was correct in the original submission,and no comments or suggestions were made from either the editors or the reviewers regarding the pictures involved.This image correction does not affect the figure legends,results,or any of the conclusions.Figure 1B5 has thus been rectified in the corrected picture below.The authors apologize for the error.
文摘In[1],the following corrections should be noted.[Figure 3 was unclear in the published version of the above paper.An updated version of Figure 3 is provided below].
文摘In this article,published online on 15 June 2015,there was an unintended error during the image processing of Figs.2 and 4.In Fig.2c,the time point 12 h was omitted and is included in the corrected Fig.2c.Figure 4a and b contain blots not intended for that experiment,which now have been replaced with the blots generated for that experiment.The conclusions drawn from the presented experiments remain unaltered,and this correction has no bearing on the final outcome of the study.The inconvenience caused by this error is deeply regretted.
