摘要
为了使光盘获得优良的记录 /读出性能并能够长期稳定地使用 ,必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件 ,从光学角度出发模拟计算了蓝光 (40 5nm)相变光盘的膜层结构 ,研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为 :下介电层 /记录层 /上介电层 /反射层的厚度对于台记录为 10 0nm/ 10nm/ 2 5nm/ 60nm ,而对于槽记录则为14 0nm/ 15nm/ 3 0nm/ 60nm ,槽深为 50nm。
In order to make the optical disk having good recording/reading performance and long-term stability, the multilayer structure of the phase-change optical disk must be optimized. By using the design software capable of simulating and analyzing the reading process for phase-change optical disk design, a phase-change optical disk structure for the blue laser (405 nm) was designed. The relation between the multilayer's optical parameters (reflectivity and reflectivity contrast) and the film thickness of the structure and the depth of the groove are studied. The optimum structures of the phase-change optical disk are lower ZnS-SiO2/AglnTeSb/upper ZnS-SiO2/Al layered structure of 100 nm/10 nm/25 nm/60 nm for land recording and 140 nm/15 nm/30 nm/60 nm for groove recording. The depth of the groove is 50 nm.
出处
《光学学报》
EI
CAS
CSCD
北大核心
2003年第12期1513-1517,共5页
Acta Optica Sinica
基金
国家 8 63计划 (2 0 0 1AA3 13 0 10 )
上海市科学技术发展基金 (0 12 2 610 68)资助课题
