摘要
对一种高速钢轧辊材料的喷射成形态和相应的母合金铸态试样的显微组织和性能进行了分析。与高速钢母合金铸态试样相比,高速钢喷射成形态试样的组织细小,偏析少,碳化物分布均匀。碳化物的种类和形态发生了变化。喷射成形态试样的维氏硬度值比较低,原因是组织中残余奥氏体量比较多。高温拉伸试验表明,喷射成形态试样在780～810℃温度范围内存在很高的拉伸延伸率,可以在该温度区间内承受大变形热加工。
The mechanical properties and microstructure of a high speed steel (HSS) for roll have been studiedIn Comparison with the ascast HSS, the assprayed HSS had fine grain and segregationfree microstructures and its carbides distributed uniformly The morphology and types of the carbides in assprayed HSS were different from those in ascast HSS Because there was more retained austenite in assprayed specimen than that in ascast specimen, the assprayed HSS had lower Vickers hardness The results of the high temperature tensile experiment show that the elongation of the assprayed HSS specimens is very large when deformation in the temperature range of 780~810℃ So the assprayed HSS can be strongly deformed in this temperature range
出处
《材料工程》
EI
CAS
CSCD
北大核心
2003年第10期42-45,共4页
Journal of Materials Engineering
关键词
喷射成形
高速钢
显微组织
性能
spray formed
high speed steel
microstructure
properties
