摘要
通过在钢基体表面制备涂层可以很好地延长钢铁材料的服役时间,减少因腐蚀造成的重大事故和人员伤亡。相较于传统的纯Zn涂层、纯Al涂层以及Zn-Al合金涂层,Zn-Al伪合金涂层能够为基体材料提供长久有效的腐蚀防护,在钢铁材料的腐蚀防护中具有巨大的应用潜力。简述了Zn-Al伪合金涂层电弧喷涂制备工艺的特点;介绍了Zn、Al、Zn-Al合金及Zn-Al伪合金涂层在模拟海洋环境下的腐蚀防护原理;在此基础上从组分、喷涂工艺参数(喷涂距离、喷涂电流和喷涂电压)、元素掺杂(Mg、Si及Re)及后处理工艺(封孔、激光重熔)等角度,论述了其对Zn-Al伪合金涂层耐蚀性的影响;讨论了Zn-Al伪合金涂层防腐体系在桥梁、海洋钢结构件、地下运输管道中的应用现状;最后总结了目前研究工作中存在的挑战,提出了电弧喷涂Zn-Al伪合金涂层尚需深入研究的重点问题,为提高钢铁材料使用寿命提供了参考。
Corrosion is one of the most common forms of steel materials,and corrosion protection of steel has been the focus worldwide.In recent years,the service life of steel materials has been effectively extended by preparing anti-corrosion coatings on the surface of steel substrates,reducing serious accidents and casualties caused by corrosion.The work aims to introduce the preparation of Zn-Al pseudo alloy coatings by arc spray and related applications,and review the research progress on the corrosion resistance of arc sprayed Zn-Al pseudo alloy coatings.Firstly,starting from the classification of thermal spray,the advantages and disadvantages of each spray technology were briefly expounded,and the main use of arc spray to prepare Zn-Al pseudo alloy coatings was clarified.Among several thermal spray techniques,flame spray and arc spray were suitable for preparing pseudo alloy coatings due to their lower temperature and slower particle velocity,which were beneficial for coating deposition.Compared to flame spray,electric energy and compressed air were used by arc spray instead of flammable gases such as oxygen and acetylene,resulting in significantly higher safety than flame spray.In addition,the coating structure prepared by arc spray was more uniform,and the bonding strength with the substrate was higher than that by flame spray.Therefore,arc spray was regarded as an ideal choice for the preparation of Zn-Al pseudo alloy coatings.Secondly,the long-term corrosion protection mechanism of Zn-Al pseudo alloy coating was elaborated,providing a theoretical basis for further improving the corrosion resistance of Zn-Al pseudo alloy coating anti-corrosion system.The microstructure of the arc sprayed Zn-Al pseudo alloy coating exhibited alternating overlap between Zn rich and Al rich regions,which was a mechanical mixture of Zn and Al phases.During the corrosion process,when the Al_(2)O_(3) passivation film on the surface of the Zn-Al pseudo alloy coating was destroyed,the Zn phase corroded preferentially and generated a dense
作者
张敏
丁玉萍
王淞
刘施峰
ZHANG Min;DING Yuping;WANG Song;LIU Shifeng(College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China)
出处
《表面技术》
EI
CAS
CSCD
北大核心
2024年第10期1-15,共15页
Surface Technology
基金
国家自然科学基金(51421001)。
