摘要
针对陶瓷基板一体化封装结构的LC滤波器,采用回流焊方法进行装配,制作了具有高可靠性的LC滤波器。采用电阻点焊对绕线电感进行引脚固定,使用贴片红胶粘接固定片式电容,实现陶瓷一体化封装LC滤波器内部元件的预固定。通过点涂方式施加焊膏,经回流焊接形成润湿良好的焊点,利用微压水柱清洗去除残留的助焊剂。经过调试和涂胶固定绕线电感后采用平行缝焊完成产品封装。对回流焊装配的LC滤波器进行过程检验、温度和机械试验。结果表明,由所研究的组装工艺制成的LC滤波器具有较好的工序直通率,满足高可靠环境应用要求,适合于批量化生产。
The high reliability LC filters with ceramic substrate integrated package were fabricated by using the reflow soldering method.The resistance spot welding process was used to fix the pins of the winding inductor,and the chip capacitors were fixed by SMT red adhesive,thus the pre-fixation of the internal components in the ceramic substrate integrated packaging LC filter was achieved.The solder paste was added by coating and the well wetted welding spots were formed,the residual flux was removed and cleaned by using the micro-pressurized water column.After debugging and glueing to fix the wound inductor,the parallel seam welding is used implement the product packaging.The process inspection,temperature and mechanical test of the LC filter fabricated by reflow soldering assembly were carried out.The results show that the LC filter fabricated by proposed assembly process have good process through rate,meet the requirements of high reliability environmental applications,and are suitable for mass production.
作者
李亚飞
温桎茹
蒲志勇
张钧翀
张伟
董姝
吴秦
LI Yafei;WEN Zhiru;PU Zhiyong;ZHANG Junchong;ZHANG Wei;DONG Shu;WU Qin(The 26th Institute of China Electronics Technology Group Corporation,Chongqing 400060,China)
出处
《压电与声光》
CAS
北大核心
2024年第1期42-47,共6页
Piezoelectrics & Acoustooptics
关键词
陶瓷基板
一体化封装
LC滤波器
回流焊接
可靠性
ceramic substrate
integrated packaging
LC filter
reflow soldering
reliability
