摘要
研究了考虑流固耦合与脉动风效应下某截椭球形充气膜结构的风压分布特性。首先,利用线性滤波器法在MATLAB中得到的脉动风速时程数据并导入Fluent中。其次,通过Workbench 17.0平台的分区弱耦合算法数值模拟得到了风致响应稳定后不同风向角、高度、内压下结构的风压系数。结果表明,考虑流固耦合时结构的负压系数极值明显变大;三个变量对结构风压系数分布、大小和变化幅度都有一定程度的影响,其中在400 Pa时能保证结构风压极值保持在较低水平。
The characteristics of wind pressure distribution of an ellipsoidal air-supported structure considering fluidstructure interaction and fluctuating wind effect were studied.Firstly,the time-history data of fluctuating wind speed obtained in MATLAB by using linear filter method was imported into Fluent.Secondly,the wind pressure coefficients of the structures under different wind direction angles,heights and internal pressures after the wind-induced response stabilized were obtained by the partitioned weakly coupled algorithm on Workbench 17.0 platform.The results showed that the extreme values of the negative pressure coefficient increased obviously when the fluid-structure interaction was considered.The three variables had influence on the distribution,magnitude and changing rate of wind pressure.The wind pressure extreme values of the structure could be kept at a low level at 400 Pa.
作者
申跃奎
李洋
刘晨迪
王佳佳
SHEN Yuekui;LI Yang;LIU Chendi;WANG Jiajia(School of Civil Engineering,Xi’an University of Architecture and Technology,Xi’an 710055,China)
出处
《工业建筑》
CSCD
北大核心
2022年第6期120-126,共7页
Industrial Construction
关键词
流固耦合
充气膜结构
脉动风
CFD数值模拟
风压分布
位移响应
fluid-solid interaction
air-supported structure
fluctuating wind
CFD numerical simulation
wind pressure distribution
displacement response
