期刊文献+

基于KDE及Markov的高速列车传动系振动评价及可靠性分析 被引量:1

Vibration Evaluation and Reliability Analysis of High-Speed Train Transmission System Based on Kernel Density Estimator and Markov Model
下载PDF
导出
摘要 为研究高速列车运行过程中传动系的振动情况及可靠性,对CRH3型高速列车传动系关键部件的振动加速度数据进行实车采集,采用核密度估计(KDE)法对采集数据统计处理,得出各关键部件在各方向上振动响应的概率密度函数近似曲线,据此对传动系的关键部件进行振动评价;通过MATLAB计算各关键部件振动加速度的最优置信区间;对传动系及传动系的关键部件定义“安全”和“故障”两种状态,建立关键部件的威布尔比例失效率模型及传动系的Markov状态转移模型,以传动系当前状态为初始状态,基于实时故障率及维修率分析传动系可靠性的变化.研究结果表明:传动系中轴箱轴承、齿轮箱以及电机轴承的垂向振动最强,振动加速度集中分布在25倍、20倍、10倍重力加速度范围内,概率99.75%的均方差值分别在20.5026倍、17.6712倍、11.4693倍重力加速度内;计算得到各关键部件振动加速度概率为99.75%的最优置信区间,为系统的振动监测阈值优化及故障评估提供参考;故障率及维修率是影响传动系统状态概率的关键因素,当故障率增加30%时,系统的状态概率约下降10%,当维修率由0.05提升至0.10时,可使系统的可靠性提高20%. In order to study the vibration and reliability of the transmission system during the operation of a highspeed train,the vibration acceleration data of the key components of the CRH3 high-speed train transmission system are collected for a real vehicle and the kernel density estimator(KDE)method is used in statistical processing.Through data processing,an approximate curve of the probability density function of the vibration response of each key component in all directions is obtained,and the vibration of the key components of the transmission system is evaluated using the curve.The optimal confidence interval of the vibration acceleration of each key component is calculated using MATLAB.Two states of“safe”and“failure”are defined for the transmission system and key components of the transmission system,and a Weibull model of the proportional failure rate of the key components and the Markov state transition model of the drive train are established.The current state of the drive train is the initial state.Changes in the reliability of the transmission system are analyzed using the real-time failure rate and maintenance rate.The results show that the vertical vibration is strongest for the axle box bearings,gearboxes,and motor bearings in the drive train,and the vibration acceleration is concentrated in the range of 25 times,20 times,and 10 times the acceleration of gravity,with a probability of99.75%,respectively.It is in the range of 20.5026 times,17.6712 times,11.4693 times the gravitational acceleration.The optimal confidence interval for the vibration acceleration probability of each key component to be 99.75%is calculated,which provides a reference for the optimization of the system’s vibration monitoring threshold and fault evaluation.The failure rate and maintenance rate are the key factors affecting the state probability of the transmission system.An increase in the failure rate of approximately 30%reduces the state probability of the system by approximately 10%,whereas an increase in the mainten
作者 刘玉梅 陈云 赵聪聪 熊明烨 LIU Yumei;CHEN Yun;ZHAO Congcong;XIONG Mingye(College of Transportation,Jilin University,Changchun 130022,China;School of Civil Engineering and Transportation,Beihua University,Jilin 132013,China;College of Engineering and Technology,Jilin Agricultural University,Changchun 130118,China;University of Illinois Urbana-Champaign,College of Engineering,Champaign Illinois IL61801)
出处 《西南交通大学学报》 EI CSCD 北大核心 2022年第4期783-790,796,共9页 Journal of Southwest Jiaotong University
基金 国家自然科学基金(51575232) 吉林省科技厅重点研发项目(20200401108GX)。
关键词 高速列车 振动评价 核密度估计 MARKOV 可靠性 high-speed train vibration acceleration kernel density estimator Markov reliability
  • 相关文献

参考文献12

二级参考文献60

共引文献97

同被引文献9

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部