摘要
通过改进重构凸轮X-C轴联动加工模型,建立X-C轴联动加工通用补偿模型;采用最小二乘拟合还原数据曲线并得到规则化输出,结合延迟补偿模式,实现凸轮加工的在线检测补偿功能。由此可解决直线和转角反馈无法补偿X-C轴联动同步误差的问题,有效降低X-C轴联动加工过程中同步误差带来的影响,提高了凸轮的加工精度和质量,为凸轮加工在线检测补偿提供可行方案。
Through the improvement and reconstruction of cam X-C axis linkage machining model,the general compensation mod⁃el of X-C axis linkage machining was established;by using the least square fitting to restore the data curve and get the regular output,and combined with the delay compensation mode,the online detection and compensation function of cam machining was realized.Therefore,it can solve the problem that the linear displacement and angular feedback cannot compensate synchronous error of the X-C axis linkage,so the influence of the X-C axis linkage synchronous error can be effectively reduced,the machining precision and quality of cam can be effectively improved,which provides a feasible scheme for the online detection compensation of cam machining.
作者
杜柳青
李祥
吕发良
余永维
DU Liuqing;LI Xiang;LYU Faliang;YU Yongwei(College of Mechanical Engineering,Chongqing University of Technology,Chongqing 400054,China)
出处
《机床与液压》
北大核心
2022年第4期1-5,共5页
Machine Tool & Hydraulics
基金
国家自然科学基金面上项目(51775074)
重庆市自然科学基金项目(cstc2021jcyj-msxmX0372)
重庆市技术创新与应用示范专项(cstc2018jszx-cyzdX0172)
重庆市基础研究与前沿探索项目(cstc2018jcyjAX0352)
重庆市研究生科研创新项目(CYS19315)。
关键词
凸轮加工
在线补偿
补偿模型
X-C联动模型
同步误差
Cam machining
Online compensation
Compensation model
X-C axis linkage model
Synchronization error
