摘要
监造作为保障组合电器设备入网质量的重要关口,对组合电器运行质量控制具有重要意义。通过对110~500 kV组合电器监造发现的缺陷进行系统梳理与深入分析,提炼出6类常见缺陷类型,并对每种监造缺陷典型案例进行分析,得到缺陷原因和整改措施,最终提出监造质量提升方法。
As an important gateway to ensure the network quality of GIS equipment,manufacturing supervision is of great significance to the operation quality control of GIS equipment.Through the systematic combing and in-depth analysis of the defects found in 110~500 kV GIS supervision,six common defect types are extracted,and the typical cases of each supervision defect are analyzed,and finally the supervision quality improvement methods are put forward.
作者
赵晓凤
丘欢
李昭廷
应丽云
洪刚
吴娅
李兴旺
杨贤
ZHAO Xiaofeng;QIU Huan;LI Zhaoting;YING Liyun;HONG Gang;WU Ya;LI Xingwang;YANG Xian(Electric Power Research Institute of Guangdong Power Grid Co.,Ltd.,Guangzhou 510080,China;Guangdong Key Laboratory of Electric Power Equipment Reliability,Guangzhou 510080,China;Guangzhou Power Supply Bureau of Guangdong Power Grid Co.,Ltd.,Guangzhou 510080,China)
出处
《电工技术》
2022年第1期77-80,共4页
Electric Engineering
关键词
GIS
出厂试验
监造
质量提升
GIS
delivery test
manufacture supervision
quality improvement
