期刊文献+

基于传感器融合里程计的相机与激光雷达自动重标定方法 被引量:8

Automatic Recalibration of Camera and LiDAR Using Sensor Fusion Odometry
原文传递
导出
摘要 智能驾驶车辆行驶环境复杂多样,不可避免地导致传感器相对位姿发生变化,此时需要进行重新标定。针对智能驾驶车辆的相机和激光雷达发生漂移后的重标定问题,提出一种基于传感器融合里程计的自动重标定方法。基于点云投影和图像配准原理建立基准点云和观测图像之间的3D-2D点对,利用N点透视投影得到平移尺度不准的相机运动;通过融合估计的激光雷达运动来恢复准确尺度的相机运动,并将基准点云根据相机运动转换到观测位置下,与观测点云通过点云配准求解变换矩阵,使用时域均值滤波得到最终的外参矩阵。基于智能驾驶车辆试验平台进行室内外实车试验。结果表明所提出的基于传感器融合里程计的方法无需设置标定板,不受环境和数据特征限制,能够实现相机和激光雷达的精确重标定,对传感器漂移具有较高的鲁棒性。 The driving environment of the intelligent vehicle is complex and diverse, which inevitably leads to the change of the relative pose of the sensors. Aiming to solving the problem of recalibration after the drift of camera or LiDAR equipped on the intelligent vehicle, the automatic recalibration method using sensor fusion odometry is proposed. First, based on the principle of point cloud projection and image registration, the 3D-2D point correspondences between the reference point cloud and the observed image are established, and the camera motion with inaccurate translation scale is estimated by the Perspective-n-Point method;Then, the accurate camera motion is recovered by fusing the estimated LiDAR motion, the reference point cloud is transformed to the observation position using the camera motion, and registrated with the observation point cloud, the final extrinsic parameter is obtained using the average filtering method. Finally, the real vehicle experiments are implemented in indoor and outdoor scenario on an intelligent vehicle. The results show that the proposed sensor fusion odometry based method does not need to set up the calibration board, and is unrestricted with the environment and data features. It is able to achieve accurate recalibration of camera and LiDAR,and has high robustness to sensor drift.
作者 彭湃 耿可可 殷国栋 庄伟超 刘帅鹏 徐利伟 PENG Pai;GENG Keke;YIN Guodong;ZHUANG Weichao;LIU Shuaipeng;XU Liwei(School of Mechanical Engineering,Southeast University,Nanjing 211189)
出处 《机械工程学报》 EI CAS CSCD 北大核心 2021年第20期206-214,共9页 Journal of Mechanical Engineering
基金 国家自然科学基金资助项目(51975118,52025121)。
关键词 智能驾驶车辆 相机和激光雷达 传感器漂移 传感器融合里程计 重标定 intelligent vehicle camera and LiDAR sensor drift sensor fusion odometry recalibration
  • 相关文献

参考文献8

二级参考文献56

  • 1叶声华,王一,任永杰,李定坤.基于激光跟踪仪的机器人运动学参数标定方法[J].天津大学学报,2007,40(2):202-205. 被引量:66
  • 2李振,张玉茹,刘军传.一种基于机器视觉的机器人标定方法[J].机械设计与研究,2007,23(3):66-69. 被引量:12
  • 3任永杰,邾继贵,杨学友,叶声华.利用激光跟踪仪对机器人进行标定的方法[J].机械工程学报,2007,43(9):195-200. 被引量:138
  • 4MAJARENAA C, SANTOLARIA J, SAMPER D, et al. An overview of kinematic and calibration models using internal external sensors or constraints to improve the behavior of spatial parallel mechanisms[J]. Sensors, 2010, 10: 10256-10297. 被引量:1
  • 5AMIRAT M Y, PONTNAU J, ARTIGUE F. A three-dimensional measurement system for robot applications[J]. Journal of Intelligent and Robotic Systems, 1994, 9(3): 291-299. 被引量:1
  • 6MENG Y, ZHUANG H. Autonomous robot calibration using vision technology[J]. Robotics and Computer- Integrated Manufacturing, 2007, 23(4): 436-446. 被引量:1
  • 7ZHANG S P, DINGY S, HAO K R, et al. An efficient two-step solution for vision-based pose determination of a parallel manipulator[J]. Robotics and Computer-Integrated Manufacturing, 2012, 28(2) : 182-189. 被引量:1
  • 8ANDREFF N, MARTINET E Unifying kinematic modeling, identification, and control of a Gough-Stewart parallel robot into a vision-based framework[J]. IEEE Transactions onRobotics, 2006, 22(6): 1077-1086. 被引量:1
  • 9RENAUD P, ANDREFF N, LAVEST J M, et al. Simplifying the kinematic calibration of parallel mechanisms using vision-based metrology[J]. IEEE Transactions on Robotics, 2006, 22(1): 12-22. 被引量:1
  • 10DAHMOUCHE R, ANDREFF N, MEZOUAR Y. Efficient high-speed vision-based computed torque control of the orthoglide parallel robot[C].// IEEE International Conference on Robotics and Automation, May3-8, 2010, Alaska, USA. 2010: 644-649. 被引量:1

共引文献101

同被引文献60

引证文献8

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部