摘要
储存环境对常压等离子体处理试样性能有潜在的影响。为了研究储存环境对常压等离子体处理后试样的影响,利用氦-氧常压喷射等离子体处理锦纶6织物,然后将处理后的试样分别存放在不同的环境中。结果表明,等离子体处理后,试样的接触角比原样低;等离子体处理30天后,干态及常态试样的接触角均比刚处理完试样的接触角有所增大;等离子体处理后试样表面粗糙度增大,氧的含量增加;环.境湿度的增大对等离子体处理后聚合物表面的性能有一定的促进作用。
The storage environments may have potential influence on plasma treated samples under atmospheric pressure.In order to investigate what influences the storage environments may have,nylon 6 fabrics were treated using helium/oxygen(He/O_(2))plasma using atmospheric pressure plasma jet(APPJ).Then the treated samples were stored at different environments.The plasma treated samples had lower contact angles than the control.30 days after plasma treatment,the contact angles all increased.Environmental scanning electron microscopy(ESEM)shows surface roughness increased,while X-ray photo electron spectroscopy(XPS)revealed that oxygen contents increased after plasma treatments.It shows that the increase of environmental humidity increased effectiveness of the plasma in polymer surface modification after plasma treatment.
作者
高志强
陈双双
张亚杰
Gao Zhiqiang;Chen Shuangshuang;Zhang Yajie(College of Textile and Clothing,Dezhou University,Dezhou,Shandong 253023,China;State Key Laboratory of Bio-fibers and Eco-textiles,Qingdao University,Qingdao,Shandong 266071,China)
出处
《针织工业》
北大核心
2021年第8期55-57,共3页
Knitting Industries
基金
山东省自然科学基金项目(ZR2013AL001)
2019年大学生创新创业训练项目(S201910448016)
青岛大学生物多糖纤维成形与生态纺织重点实验室开放课题基金资助项目(2017kfkt08)。
关键词
等离子体
锦纶6
储存环境
性能
Plasma
Nylon 6
Storage Environment
Influence
