期刊文献+

氧等离子体处理对涤纶织物数码转移印花的作用 被引量:3

Effect of Oxygen Plasma Processing on Digital Transfer Printing of Polyester Fabric
下载PDF
导出
摘要 为了研究低温等离子体处理对涤纶织物数码转移印花的影响,采用扫描电子显微镜(SEM)观察,发现了经等离子体处理的涤纶纤维表面被明显刻蚀,使纤维表面产生大量的细微凹孔;通过X-光电子能谱(XPS)分析,揭示了经等离子体处理的涤纶纤维表面含氧化学基团有所增加;同时,接触角测试表明等离子体处理的涤纶织物润湿性有了明显的提升。显然,氧等离子体中高能粒子的撞击导致涤纶纤维表面大分子链发生部分降解,表现为处理后涤纶纤维表面粗糙度的提高,使得纤维比表面积提高,增加了热转移印花中分散染料在纤维表面的富集和染着,而纤维表面粗糙度的增加也改变了纤维表面的光反射特征,进而又促进了涤纶织物转移印花得色率的提高。热重分析(TG)表明等离子体对涤纶织物造成的损伤非常小,甚至低于热转移过程本身造成对纤维的损伤。所以,等离子体处理可以作为涤纶织物数码转移印花的前处理,以减少分散染料墨水的消耗。 Scanning electron microscope(SEM)was adopted for studying the effect of low temperature plasma processing on digital transfer printing of polyester fabric.It was found that the surface of polyester fiber processed by plasma had been obviously etched,so that a large number of micro concave holes were produced on fiber surface.XPS analysis revealed that the chemical oxygen-containing polar group increased on the surface of polyester fiber processed by plasma.Water contact angle test showed that the wettability of polyester fabric processed by plasma had been increased significantly.Obviously,partial degradation of macromolecular chain on polyester fiber surface was caused by impact of high-energy particles in oxygen plasma,which is reflected by increase of surface roughness of processed polyester fiber.The increase of surface roughness increased the specific surface area of fiber,and enhanced gathering and saddening of disperse dyes on fiber surface in thermal transfer printing.Besides,the increase of surface roughness of fiber also had changed the light reflection characteristics of fiber surface,and promoted increase in color yield rate in transfer printing of polyester fabric.TG analysis showed that there was little damage on polyester fabric caused by plasma,which is less than that caused by transfer printing.Therefore,plasma processing can be used for pre-treatment of polyester fabric digital transfer printing to reduce the consumption of disperses dye ink.
作者 MD Ali Hossain 陈维国 王成龙 金淑兰 吴浩 张亚 MD Ali Hossain;CHEN Weiguo;WANG Chenglong;JIN Shulan;WU Hao;ZHANG Ya(Engineering Research Center for Eco-Dyeing&Finishing of Textiles,Ministry of Education,Zhejiang Sci-Tech University,Hangzhou 310018,China;Jinhua JielingHousehold Goods Co.,Ltd.,Jinhua 321037,China)
出处 《现代纺织技术》 2020年第2期70-75,84,共7页 Advanced Textile Technology
基金 浙江理工大学校长留学生奖学金的支持
关键词 等离子体 数码转移印花 涤纶织物 表面改性 表面粗糙度 plasma digital transfer printing polyester fabric surface modification surface
  • 相关文献

参考文献1

二级参考文献15

  • 1Zhang Chunming, Fang Kuanjun. 2009, Surface Coat- ings Technology, 203:2058. 被引量:1
  • 2Mr6ek A, Lehock M, Smolka P, et al. 2010, Fibers &= Polymers, 11:1106. 被引量:1
  • 3Wang Chunying, Wang Chaoxia. 2010, Fibers & Poly- mers, 11:223. 被引量:1
  • 4Liu Wenzheng, Jia Lingyun, Yan Wei, et al. 2011, Cur- rent Applied Physics, 11:117. 被引量:1
  • 5Li B, Chen Q, and Liu Z W. 2010, Apply Physics Letter, 96:04150. 被引量:1
  • 6Chiper A S, Rusu B G, Nastuta A V, et al. 2009, IEEE Transaction on Plasma Science, 37:2098. 被引量:1
  • 7Shi J J, Liu D W, Kong M G. 2006, Apply Physics Let- ter, 89:081502. 被引量:1
  • 8Shi J J, Liu D W, Kong M G. 2007, IEEE Transactions on Plasma Science, 35:137. 被引量:1
  • 9Liu Wenzheng, Sun Guangliang, Li Chuanhui. 2014, Physics of Plasmas, 21:043514. 被引量:1
  • 10Wei Q F, Gao W D, Hou D Y, et al. 2005, Apply Surface Science, 245:16. 被引量:1

共引文献3

同被引文献32

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部