摘要
采用对照试验分析自发光水泥基材料的力学性能,研究了发光砂掺量以及反光粉掺量两个因素对自发光水泥基材料的力学性能的影响。结果表明,通过改变这两个因素的比例,既可以改变自发光水泥基材料的发光强度又可以对其力学强度施加影响。在发光砂掺量为8%时,自发光水泥基材料力学性能最佳,而随着反光粉掺量的增多,自发光水泥基材料力学性能逐渐下降。
In order to analyze the mechanical properties of self-luminous cement-based materials, the effects of luminescent sand content and reflective powder content on the mechanical properties of self-luminous cement-based materials were studied by controlled tests in this paper.The results show that by changing the ratio of these two factors, the luminescence intensity and mechanical strength of self-luminous cement-based materials can be changed.When the luminescent sand content is 8%,and the mechanical properties of self-luminous cement-based materials are the best.With the increase of reflective powder content, the mechanical properties of self-luminescent cement-based materials decreased gradually.
作者
陈永飞
刘杰胜
武肖雨
卢雨婷
CHEN Yong-fei;LIU Jie-sheng;WU Xiao-yu;LU Yu-ting(Shool of Civil Engineering and Architecture,Wuhan Polytechnic University,Wuhan 430023,China)
出处
《武汉轻工大学学报》
2021年第3期42-46,共5页
Journal of Wuhan Polytechnic University
基金
湖北省交通厅科技项目(2018-422-1-11)。
关键词
自发光水泥基
发光砂
反光粉
力学性能
长余辉发光材料
self-luminous cement base
light sand
reflective powder
mechanical properties
long afterglow luminescent materia
