摘要
为探究微量氧化石墨烯在PET合成过程中的作用以及对GO/PET改性聚酯结构的影响,以PTA、EG为单体,微量GO为改性剂,采用原位聚合直接酯化法合成GO/PET改性聚酯。通过特性黏度、端羧基含量、DSC、TG以及红外光谱分析,结果表明:微量GO的加入提高了PET的特性黏度和黏均分子量,特性黏度范围在0.68~0.73dL/g;GO/PET的端羧基(—COOH)含量均小于纯PET的端羧基含量,说明GO的加入有利于PET的合成,能够使聚酯的合成更加完善;FTIR分析得到,GO经共聚反应后,1720 cm^(-1)处的C=O峰与719 cm^(-1)处的C—H峰都明显增强,推测PET大分子链已通过化学键结合的方式成功引入到GO片上;DSC、TG分析得到,微量GO的加入加快了试样的结晶速率以及增强了试样的热稳定性。
In order to explore the role of trace amount of graphene oxide in the process of PET synthesis and its influence on the structure of GO/PET modified polyester,PTA and EG were used as monomers,and trace amount of GO was used as a modifier to synthesize GO/PET modified polyester by the in-situ polymerization and direct esterification method.The analysis results of intrinsic viscosity,terminal carboxyl group content,DSC,TG and infrared spectroscopy showed that the addition of trace amount of GO increased the intrinsic viscosity and viscosity average molecular weight of PET,and the intrinsic viscosity ranged from 0.68 to 0.73 dL/g.The terminal carboxyl group(-COOH)content of GO/PET was lower than that of pure PET,indicating that the addition of GO is beneficial to the synthesis of PET and can make the synthesis of polyester more perfect.FTIR analysis showed that after GO copolymerization,The C=O peak at 1720 cm^(-1)and the CH peak at 719 cm^(-1)were both significantly enhanced.It is speculated that the PET macromolecular chain has been successfully introduced into the GO sheet through chemical bonding.DSC and TG analysis showed that the addition of trace amount of GO accelerated the crystallization rate of the samples and enhanced the thermal stability of the samples.
作者
吴跃亚
蒲新明
郑兵
张顺花
WU Yueya;PU Xinming;ZHENG Bing;ZHANG Shunhua(School of Materials Science&Engineering,Zhejiang Sci-Tech University,Hangzhou 310018;Wankai New Materials Co.,Ltd.,Haining 314415,China;State Key Lab of Chemical EngineeringDepartment of Chemical and Biological Engineering,Zhejiang University,Hangzhou 310058,China)
出处
《现代纺织技术》
北大核心
2021年第4期96-101,共6页
Advanced Textile Technology
关键词
氧化石墨烯
微量
PET
改性
原位聚合
结构性能
graphene oxide
trace amount
PET
modification
in-situ polymerization
structural properties
