摘要
在水轮机圆柱式导水机构中,偏心销常用来补偿制造偏差及表面磨损,但其对导叶开度的影响容易被忽略。首先通过建立具有代表意义的理想开度机构,分析得到不含偏心销结构的开度机构运动关系。然后将常见的两种偏心销结构引入理想开度机构中,利用MATLAB计算得到了偏心销对导叶全开转角的影响曲线。分析表明,影响导叶开度的主要因素为偏心销的偏心值和锁定对象,其中偏心销的锁定对象对导叶的开度影响是更大且更应该被重视的。在导水机构设计和安装时,不仅应选取合理的偏心值和恰当的锁定对象,而且对于偏心销与控制环锁定结构还应保证偏心销偏心方向的一致性。本文的分析及结论对水轮机的设计和水电站的安装维护具有一定的指导意义。
In the cylindrical water distributor of a hydro turbine,eccentric pins are usually used to compensate manufacture deviations and worn surfaces,but their influence on the opening of wicket gates is often ignored.First,this paper develops an ideal model for the gate opening and derives a motion relationship among the assembled parts to realize the gate opening mechanism for the case without eccentric pins.Then,using this model,we examine two types of eccentric pins and use Matlab to calculate and depict curves representing the influence of the pins on the angle of the fully opened gates.The analysis shows that two dominant factors are the eccentricity of the pins and those parts that are locked to the pins,and the latter factor is more significant and should be emphasized.In design and installation,a reasonable eccentricity and appropriate locked parts should be considered and selected,and the same eccentric direction should be guaranteed for the eccentric pins locked to the regulating ring.
作者
杜芝鹏
吴建杰
刘学东
胥海波
DU Zhipeng;WU Jianjie;LIU Xuedong;XU Haibo(Dongfang Electric Machinery Co.,Ltd,Deyang,Sichuan 618000)
出处
《水力发电学报》
EI
CSCD
北大核心
2021年第4期35-42,共8页
Journal of Hydroelectric Engineering
关键词
偏心销
导叶开度
开度偏差
偏心值
偏心销锁定对象
eccentric pin
opening of wicket gate
deviation in opening
eccentric value
eccentric pinlocked object
