摘要
为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器。首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系。根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比研究,在此基础上搭建受压弯曲微动平台开展实验研究,结果表明:在直梁构件受压弯曲应变测量时,Y34°切向的桥型声表面波应变传感器的应变灵敏度为1692 Hz/με,传统声表面波传感器应变灵敏度为1328 Hz/με,桥型声表面波应变传感器的应变灵敏度较传统声表面波应变传感器有明显提高。
In this paper,a bridge surface acoustic wave(SAW)strain sensor is proposed to improve the strain sensitivity of the SAW strain sensor.First,a bridge SAW strain sensor is designed based on the characteristics of the strain distribution in the straight beam under bending.The finite element model of the bridge SAW strain sensor is established,and the relationship between the geometric parameters of the bridge structure and the sensitivity of the SAW strain sensor is analyzed combined with the perturbation method.Then the geometric structure parameters are determined according to the analysis results,and the strain sensitivities of the bridge SAW strain sensor and traditional SAW strain sensor are compared and analyzed in detail.Eventually,a micro-motion platform is built to carry out the experimental research.The results indicates that,the strain sensitivity under bending compression of the Y34°cut bridge SAW sensor is 1692 Hz/με,while thatof the traditional SAW sensor is 1328 Hz/με.The sensitivity of the bridge SAW strain sensor is significantly improved compared to the traditional sensor.
作者
李鹏旭
李红浪
程利娜
卢孜筱
罗为
刘久玲
LI Pengxu;LI Honglang;CHENG Lina;LU Zixiao;LUO Wei;LIU Jiuling(Institute of Acoustics,Chinese Academy of Sciences,Beijing 100190,China;The National Center for Nanoscience and Technology,Beijing 100190,China;University of Chinese Academy of Sciences,Beijing 100049,China;Huazhong University of Science and Technology,Wuhan 430074,China)
出处
《应用声学》
CSCD
北大核心
2021年第2期237-242,共6页
Journal of Applied Acoustics
基金
国家重点研发计划项目(2019YFB1405403)
“科技创新2025”重大专项(2019B10122)。
关键词
声表面波
应变传感器
受压弯曲
桥型结构
应变灵敏度
Surface acoustic wave
Strain sensor
Bend deformation
Bridge structure
Strain sensitivity
