摘要
文中研究了一种基于红外探测的人员搜索及定位技术,分析了该种探测技术的工作原理,并对相应探测装备的硬件组成进行了设计,主要包括激光测距模块、红外探测模块和电子罗盘模块的参数选型以及深度测量模块的硬件设计。为了验证该探测技术的正确性,测试了深度测量模块的测量精度和红外摄像模块探测效果,并针对密闭房间中的目标人员进行了搜索与定位。试验结果表明:文中设计的深度测量模块和选用的红外摄像模块均能满足实际测量要求,设计的简易探测设备能够准确搜索及定位目标人员。
In this paper,a personnel search and orientation technology was studied based on the infrared detection,and the working principle of this detection technology was analyzed.Hardware composition of the corresponding detection equipment was designed,which mainly included the hardware design of the parameter selection of the laser ranging module,the infrared detection module and the electronic compass and the depth measurement module.In order to verify the correctness of the detection technology,the measurement accuracy of the depth measurement module and the detection effect of the infrared camera module were tested in this paper,and the target person in the closed room was searched and located.Test results showed that the depth measurement module and the selected infrared camera module could meet the actual measurement requirements,and the simple detection device could accurately search and locate the target person.
作者
刘耀波
Liu Yaobo(China Coal Technology Engineering Group Xi’an Research Institute,Xi’an 710077,China)
出处
《矿山测量》
2020年第5期31-35,58,共6页
Mine Surveying
基金
中煤科工集团西安研究院有限公司科技创新基金面上项目(2019XAYMS06)。
关键词
红外探测
深度测量
人员搜索
人员定位
infrared detection
depth measurement
personnel search
personnel orientation
