摘要
分析Zr-4合金板材真空退火过程中的传热方式,计算锆合金板材径向传热系数,利用ABAQUS对Zr-4合金板材退火温度场进行数值模拟,分析工装夹具对锆合金板材退火的影响,结果表明,工装夹具能改善锆合金板材温度场分布均匀性,使锆合金板材温度分布的最高温差由70℃降低至35℃,升温过程更加稳定,并且数值模拟结果与实测结果有较好的一致性。
Heat transfer mode of Zr-4 alloy sheet during vacuum annealing is analyzed,and the radial heat transfer coefficient of Zr-4 alloy sheet is calculated.The temperature field of Zr-4 alloy sheet during annealing was simulated by using ABAQUS,and the influence of fixture on annealing of Zr-4 alloy sheet was analyzed.The numerical simulation results were verified by experimental measurement.The results show that the fixture can improve the uniformity of temperature distribution of zirconium alloy sheet,and the numerical simulation results are in good agreement with the measured results.
作者
张宏智
杨攀
郭冬旭
吴裕
赵勇
强瑞
谭小练
Zhang Hongzhi;Yang Pan;Guo Dongxu;Wu Yu;Zhao Yong;Qiang Rui;Tan Xiaolian(Laboratory for Reactor Fuel and Materials,Nuclear Power Institute of China,Chengdu Sichuan 610213,China;School of Mechanical Engineering,Yanshan University,Qinhuangdao Hebei 066004,China)
出处
《金属热处理》
CAS
CSCD
北大核心
2020年第7期238-242,共5页
Heat Treatment of Metals
关键词
Zr-4合金板材
真空退火
温度场
数值模拟
Zr-4 alloy sheet
vacuum annealing
temperature field
numerical simulation
