期刊文献+

用管式反应器催化氧化制备米氏醇

Preparation of 4,4’-Bis(dimethylamino)benzohydrol by Catalytic Oxidation in the Tubular Reactor
下载PDF
导出
摘要 米氏醇是用于合成染料结晶紫内酯(CVL)的重要中间体,通常以甲烷贝斯(4,4’-双二甲氨基二苯基甲烷)为原料,经过催化氧化过程制备。本文考察了使用负载型金属氧化物催化剂,在管式反应器中生产米氏醇的工艺路线,为工业化连续生产米氏醇提供工艺指导和反应器设计参考。 4,4’-Bis(dimethylamino)benzohydrol is an important dye intermediate for the production of crystal violet lactone(CVL). It is usually prepared by catalytic oxidation of 4,4 ’-dimethylaminodiphenylmethane and oxygen. In this paper, 4,4’-bis(dimethylamino) benzohydrol was prepared through continuous reaction with supported oxidation catalyst in a tubular reactor. And the process of oxidation in the tubular reactor was investigated. The paper can provide process guidance and reactor design reference for industrial continuous production of 4,4’-bis(dimethylamino)benzohydrol.
作者 邹德强 程晓霞 张云邦 郑学德 ZOU De-qiang;CHENG Xiao-xia;ZHANG Yun-bang;ZHENG Xue-de(Dalian First Organic Chemical Co.,Ltd.,Liaoning Dalian 116308,China;Dalian Huizhi Human Resources Service Co.,Ltd.,Liaoning Dalian 116011,China)
出处 《辽宁化工》 CAS 2020年第6期637-639,共3页 Liaoning Chemical Industry
关键词 米氏醇 染料中间体 管式反应器 催化氧化 4 4’-Bis(dimethylamino)benzohydrol Dye intermediates Tubular reactor Catalytic oxidation
  • 相关文献

参考文献4

二级参考文献27

  • 1王帅,钟宏.结晶紫内酯合成工艺的研究进展[J].化学研究,2005,16(2):106-108. 被引量:3
  • 2陈丽娜,白国信,叶明新.油溶性结晶紫内酯的合成与性能[J].复旦学报(自然科学版),2006,45(3):375-379. 被引量:6
  • 3包传平,谭涛,丁一刚,陈斌.结晶紫内酯的合成及其热变色性研究[J].贵州化工,2007,32(2):27-29. 被引量:3
  • 4S.S. Bu,J. Yang,M. Zhou,S.Y. Li,Q.W. Wang,Z.X. Guo.On contact point modifications for forced convective heat transfer analysis in a structured packed bed of spheres[J]. Nuclear Engineering and Design . 2014 被引量:1
  • 5Anthony G. Dixon,Gregory Walls,Helen Stanness,Michiel Nijemeisland,E. Hugh Stitt.Experimental validation of high Reynolds number CFD simulations of heat transfer in a pilot-scale fixed bed tube[J]. Chemical Engineering Journal . 2012 被引量:1
  • 6T. Eppinger,K. Seidler,M. Kraume.DEM-CFD simulations of fixed bed reactors with small tube to particle diameter ratios[J]. Chemical Engineering Journal . 2010 (1) 被引量:1
  • 7Theodoros Atmakidis,Eugeny Y. Kenig.CFD-based analysis of the wall effect on the pressure drop in packed beds with moderate tube/particle diameter ratios in the laminar flow regime[J]. Chemical Engineering Journal . 2009 (1) 被引量:1
  • 8J. Theuerkauf,P. Witt,D. Schwesig.Analysis of particle porosity distribution in fixed beds using the discrete element method[J]. Powder Technology . 2006 (2) 被引量:1
  • 9S.J.P Romkes,F.M Dautzenberg,C.M van den Bleek,H.P.A Calis.CFD modelling and experimental validation of particle-to-fluid mass and heat transfer in a packed bed at very low channel to particle diameter ratio[J]. Chemical Engineering Journal . 2003 (1) 被引量:1
  • 10Wakao N,Kaguei S.Heat and mass transfer in packed beds. . 1982 被引量:1

共引文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部