摘要
对核电厂设备闸门提升与导向装置在设备闸门封头开启与关闭过程中的运动特性进行了分析研究,该研究借助动力学仿真软件ADAMS展开,分别对提升与导向装置可能出现的同步提升操作和不同步提升操作两种工况进行了仿真分析。分析结果表明:在同步提升操作工况下,设备闸门封头两侧导向箱位移一致,提升与导向装置不会产生卡滞;在不同步提升操作工况下,设备闸门封头两侧导向箱最大允许高度差为54 mm,否则提升与导向装置将产生卡滞。
Focusing on the dynamics characteristics of lifting and guiding devices of equipment access hatch during opening and closing process, this paper adopts ADAMS(Automatic Dynamic Analysis of Mechanical Systems) to analyze the displacement property, including different displacement of the sleeves and distortion of the guiding rails. The kinetic simulation results indicate that: under synchronous condition, the lifting and guiding devices will not be restricted. However, the maximal altitudinal difference should be controlled within 54 mm under non-synchronous condition, otherwise the lifting and guiding devices will be restricted.
作者
谢洪虎
张峰
刘小华
何英勇
钦军伟
张译寒
Xie Honghu;Zhang Feng;Liu Xiaohua;He Yingyong;Qin Junwei;Zhang Yihan(State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment,China Nuclear Power Engineering Co.Ltd.,Shenzhen,Guangdong,518172,China)
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2020年第1期180-184,共5页
Nuclear Power Engineering
关键词
设备闸门
提升与导向装置
封头
动力学
仿真分析
Equipment access hatch
Lifting and guiding device
Hatch
Kinetic
Simulation
